Makita BO3710 Manual

Makita Planslibere BO3710

Læs gratis den danske manual til Makita BO3710 (14 sider) i kategorien Planslibere. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Makita BO3710, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/14
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Finishing Sander
BO3710
BO3711
010213
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model BO3710 BO3711
Pad size 93 mm x 185 mm
Abrasive paper size 93 mm x 228 mm
Orbits per minute (min-1) 11,000 4,000 - 11,000
Overall length 253 mm
Net weight 1.6 kg
Safety class /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-5
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE052-1
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
ENF002-1
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
ENG104-1
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA) : 72 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
Wear ear protection.
ENG211-2
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : sanding metal plate
Vibration emission (ah) : 3.5 m/s2
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-12
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Finishing Sande
r
Model No./ Type: BO3710,BO3711
are of series production and
Conforms to the following European Directives:
98/37/EC until 28th December 2009 and then with
2006/42/EC from 29th December 2009
And are manufactured in accordance with the following

Produkt Specifikationer

Mærke: Makita
Kategori: Planslibere
Model: BO3710

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita BO3710 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Planslibere Makita Manualer

Makita

Makita BO4565 Manual

5 Oktober 2022
Makita

Makita BO3710 Manual

5 Oktober 2022
Makita

Makita BO3711 Manual

5 Oktober 2022

Planslibere Manualer

Nyeste Planslibere Manualer

Skil

Skil 7362 AA Manual

5 Oktober 2022
Festool

Festool ETS 150/5 E Manual

5 Oktober 2022
Hitachi

Hitachi SV 8SA Manual

5 Oktober 2022
Bort

Bort BS-300N Manual

5 Oktober 2022
FERM

FERM PSM1029P Manual

5 Oktober 2022
AEG

AEG VSS 260 Manual

5 Oktober 2022
Parkside

Parkside PSS 270 C3 Manual

5 Oktober 2022
Festool

Festool RS 300 EQ Manual

5 Oktober 2022
Güde

Güde FS 90 E Manual

5 Oktober 2022
Festool

Festool ETS EC 150/5 A EQ Manual

5 Oktober 2022