Makita DA001GD201 Manual

Makita Ikke kategoriseret DA001GD201

Læs gratis den danske manual til Makita DA001GD201 (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 81 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 41 anmeldelser. Har du et spørgsmål om Makita DA001GD201, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

INSTRUCTION MANUAL

Cordless Angle Drill

DA001G

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DA001G

Gear speed High Low

Drilling capacities

(Diameter)

Steel 13 mm

Wood Auger bit: 50 mm

Self-feed bit: 65 mm

Hole saw: 105 mm

Auger bit: 50 mm

Self-feed bit: 118 mm

Hole saw: 159 mm

No load speed 0 - 1,500 min-1 0 - 400 min-1

Overall length (with battery cartridge BL4040)

*With the front handle extended

545 mm

* 614 mm

Rated voltage D.C. 36 V - 40 V max

Net weight 5.6 - 6.2 kg

•

Due to our continuing program of research and development, the specications herein are subject to change without notice.

• Specications may di󰀨er from country to country.

• The weight may di󰀨er depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge BL4020 / BL4025* / BL4040* / BL4050F*

* : Recommended battery

Charger DC40RA / DC40RB / DC40RC

•

Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges

and chargers may cause injury and/or re.

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Read instruction manual.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or

battery pack together with household waste

material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for drilling in wood, metal and

plastic.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841-2-1:

Sound pressure level (LpA) : 84 dB(A)

Sound power level (LWA) : 95 dB (A)

Uncertainty (K) : 3 dB(A)

NOTE:

The declared noise emission value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE:

The declared noise emission value(s) may

also be used in a preliminary assessment of exposure.

WARNING: Wear ear protection.

WARNING:

The noise emission during actual

use of the power tool can di󰀨er from the declared

value(s) depending on the ways in which the tool is

used especially what kind of workpiece is processed.

WARNING:

Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (tak-

ing account of all parts of the operating cycle such

as the times when the tool is switched o󰀨 and when

it is running idle in addition to the trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-2-1:

Work mode: drilling into metal

Vibration emission (a

h,D ) : 2.5 m/s

2 or less

Uncertainty (K) : 1.5 m/s

NOTE: The declared vibration total value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE: The declared vibration total value(s) may also

be used in a preliminary assessment of exposure.

Produkt Specifikationer

Mærke:	Makita
Kategori:	Ikke kategoriseret
Model:	DA001GD201

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita DA001GD201 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Makita Manualer

20 Juni 2025

19 Juni 2025

19 Juni 2025

17 Juni 2025

17 Juni 2025

17 Juni 2025

17 Juni 2025

29 Marts 2025

29 Marts 2025

29 Marts 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

SKS Velo 47 Trekking Manual

1 Juli 2025

Alphacool Eisblock Aurora Radeon RX 7800 XT Reference Manual

1 Juli 2025

Mercyu MRU-161 Manual

1 Juli 2025

Ikea UTRUSTA 802.745.24 Manual

1 Juli 2025

Point POKM241 Manual

1 Juli 2025

Casio JW-200SV Manual

1 Juli 2025

Foster FMSLIM900NG Manual

1 Juli 2025

JWIN JT-P10 Manual

1 Juli 2025

Intermatic AG3000 Manual

1 Juli 2025

Haeger Elegant HB-400.021A Manual

1 Juli 2025