Makita DBO380RTJ Manual

Makita Ikke kategoriseret DBO380RTJ

Læs gratis den danske manual til Makita DBO380RTJ (20 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Makita DBO380RTJ, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

INSTRUCTION MANUAL

Cordless Finishing Sander

DBO380

DBO381

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DBO380 DBO381

Pad size 92 mm x 185 mm

Abrasive paper size 93 mm x 228 mm

Orbits per minute 12,000 minHigh -1

Medium 8,000 min

-1

Low 4,000 min-1

Overall length (with front grip) 336 mm

Rated voltage D.C. 18 V

Net weight 1.9 - 2.2 kg

•

Due to our continuing program of research and development, the specications herein are subject to change without notice.

• Specications and battery cartridge may di󰀨er from country to country.

• The weight may di󰀨er depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combinations, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B

Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /

DC18SH

•

Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges

and chargers may cause injury and/or re.

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Read instruction manual.

Wear safety glasses.

Ni-MH

Li-ion

Only for EU countries

Due to the presence of hazardous com-

ponents in the equipment, waste electrical

and electronic equipment, accumulators

and batteries may have a negative impact

on the environment and human health.

Do not dispose of electrical and electronic

appliances or batteries with household waste!

In accordance with the European Directive on

waste electrical and electronic equipment and on

accumulators and batteries and waste accumu-

lators and batteries, as well as their adaptation to

national law, waste electrical equipment, batter-

ies and accumulators should be stored sepa-

rately and delivered to a separate collection point

for municipal waste, operating in accordance with

the regulations on environmental protection.

This is indicated by the symbol of the crossed-

out wheeled bin placed on the equipment.

Intended use

The tool is intended for the sanding of large surface of wood,

plastic and metal materials as well as painted surfaces.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841-2-4:

Model DBO380

Sound pressure level (L

pA) : 72 dB(A)

Uncertainty (K) : 3 dB(A)

Model DBO381

Sound pressure level (L

pA) : 72 dB(A)

Uncertainty (K) : 3 dB(A)

The noise level under working may exceed 80 dB (A).

NOTE: The declared noise emission value(s) has

been measured in accordance with a standard test

method and may be used for comparing one tool with

another.

NOTE: The declared noise emission value(s)

may also be used in a preliminary assessment of

exposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual

use of the power tool can di󰀨er from the declared

value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

o󰀨 and when it is running idle in addition to the

trigger time).

Produkt Specifikationer

Mærke:	Makita
Kategori:	Ikke kategoriseret
Model:	DBO380RTJ
Produktfarve:	Black, Blue
Batterispænding:	18 V
Strømkilde:	Batteri
Tomgang (maks.):	- rpm
Slibeskive, diameter:	- mm