Makita DCC500RTJ Manual
Makita
Ikke kategoriseret
DCC500RTJ
Læs gratis den danske manual til Makita DCC500RTJ (24 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Makita DCC500RTJ, eller vil du spørge andre brugere om produktet?
Side 1/24

INSTRUCTION MANUAL
Cordless Dustless Cutter
DCC500
ENGLISH: Original instructions
Read before use.

2 ENGLISH
SPECIFICATIONS
Model: DCC500
Wheel diameter 125 mm
Max. wheel thickness 2.2 mm
Max. cutting capacities 0° bevel angle 40 mm
45° bevel angle 27 mm
Rated speed (n) 8,800 min-1
Overall length 283 mm *1
Rated voltage D.C. 18 V
Net weight 2.5 - 3.0 kg
*1. With battery cartridge (BL1860B).
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydierfromcountrytocountry.
• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
andchargersmaycauseinjuryand/orre.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear safety glasses.
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for cutting in brick and concrete
without the use of water. With appropriate Makita genu-
ine water supply cover, wet cutting can be performed.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745-2-22:
Sound pressure level (L
pA) : 96 dB(A)
Sound power level (L
WA) : 107 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can dier from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
Produkt Specifikationer
Mærke: | Makita |
Kategori: | Ikke kategoriseret |
Model: | DCC500RTJ |
Har du brug for hjælp?
Hvis du har brug for hjælp til Makita DCC500RTJ stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret Makita Manualer
19 Juli 2025
9 Juli 2025
9 Juli 2025
9 Juli 2025
9 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025
8 Juli 2025
Ikke kategoriseret Manualer
- Sound Devices
- Mio
- OutdoorChef
- Tekron
- Paingone
- Elinchrom
- Step2
- Dodow
- XQ-lite
- TVS
- VMV
- TranzX
- Techno Line
- LTC
- SwitchBot
Nyeste Ikke kategoriseret Manualer
27 Juli 2025
27 Juli 2025
27 Juli 2025
27 Juli 2025
27 Juli 2025
27 Juli 2025
27 Juli 2025
27 Juli 2025
27 Juli 2025
27 Juli 2025