Makita DCG180RTB Manual
Makita
Ikke kategoriseret
DCG180RTB
Læs nedenfor 📖 manual på dansk for Makita DCG180RTB (12 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 29 personer og blev bedømt med 4.9 stjerner i gennemsnit af 15 brugere
Side 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
IMPORTANT: Read Before Using.
Cordless Caulking Gun
DCG140
DCG180
013564
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model DCG140 DCG180
Max feed force 5000 N
Feed speed 0 - 28 mm/s
with short (300ml) holder 214 mm
Stroke with long (600ml) holder 350 mm
with short (300ml) holder 404 mm
Overall length with long (600ml) holder 538 mm
Standard battery cartridge BL1415 /
BL1415N
BL1430 /
BL1440
BL1815 /
BL1815N/BL1820
BL1830 /
BL1840/BL1850
with short (300ml) holder 2.0 kg 2.2 kg 2.1 kg 2.3 kg
Net weight with long (600ml) holder 2.4 kg 2.6 kg 2.5 kg 2.7 kg
Rated voltage D.C.14.4 V D.C.18 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END004-4
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and electronic
equipment, 2006/66/EC on batteries and
accumulators and waste batteries and
accumulators and their implementation in
accordance with national laws, electric
equipment and battery pack that have
reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling facility.
ENE086-1
Intended use
This tool is intended for applying caulking material to
surface.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA) : 70 dB (A) or less
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Vibration emission (ah) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Cd
Ni-MH
Li-ion
Produkt Specifikationer
| Mærke: | Makita |
| Kategori: | Ikke kategoriseret |
| Model: | DCG180RTB |
Har du brug for hjælp?
Hvis du har brug for hjælp til Makita DCG180RTB stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret Makita Manualer
29 Marts 2025
29 Marts 2025
29 Marts 2025
29 Marts 2025
29 Marts 2025
6 Februar 2025
12 Januar 2025
7 Januar 2025
16 December 2024
16 December 2024
Ikke kategoriseret Manualer
- Ikke kategoriseret ClearOne
- Ikke kategoriseret Aquael
- Ikke kategoriseret On-Stage
- Ikke kategoriseret My Arcade
- Ikke kategoriseret Esperanza
- Ikke kategoriseret Gamma
- Ikke kategoriseret ANDYCINE
- Ikke kategoriseret Hertz
- Ikke kategoriseret Signature Hardware
- Ikke kategoriseret Microsoft
- Ikke kategoriseret RDL
- Ikke kategoriseret Heckler Design
- Ikke kategoriseret Analogis
- Ikke kategoriseret Qute
- Ikke kategoriseret BC Acoustique
Nyeste Ikke kategoriseret Manualer
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025
6 Juni 2025