Makita DCS550RMJ Manual

Makita Sav DCS550RMJ

Læs gratis den danske manual til Makita DCS550RMJ (12 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 53 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 27 anmeldelser. Har du et spørgsmål om Makita DCS550RMJ, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cordless Metal Cutter

BCS550

007522

ENGLISH (Original instructions)

SPECIFICATIONS

Model BCS550

Blade diameter 136 mm

Max. Cutting depth 51 mm

No load speed (min

-1) 3,600

Overall length 348 mm

Net weight 2.6 kg

Rated voltage D.C. 18 V

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END004-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of the European

Directives, on Waste Electric and

Electronic Equipment and Batteries and

Accumulators and Waste Batteries and

Accumulators and their implementation

in accordance with national laws,

electric equipment and batteries and

battery pack(s) that have reached the

end of their life must be collected

separately and returned to an

environmentally compatible recycling

facility.

ENE066-1

Intended use

The tool is intended for cutting in mild steel and

aluminum only with appropriate saw blades.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Sound pressure level (L

pA) : 78 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : cutting metal

Vibration emission (ah,M) : 2.5 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-16

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Cordless Metal Cutter

Model No./ Type: BCS550

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN60745

Ni-MH

Li-ion

Produkt Specifikationer

Mærke:	Makita
Kategori:	Sav
Model:	DCS550RMJ
Bredde:	180 mm
Dybde:	348 mm
Højde:	201 mm
Vægt:	2600 g
Produktfarve:	Black, Blue
Batterispænding:	18 V
Batterikapacitet:	4 At
Batteriteknologi:	Lithium-Ion (Li-Ion)
Strømkilde:	Batteri
Tomgang (maks.):	3600 rpm
Vibrationsudledning:	3 m/s²
Blad, diameter:	136 mm
Klinge boring:	20 mm
Skæredybe (90º):	51 mm