Makita DGD800Z Manual

Makita Slibemaskine DGD800Z

Læs gratis den danske manual til Makita DGD800Z (28 sider) i kategorien Slibemaskine. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Makita DGD800Z, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/28
1
INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
IMPORTANT: Read Before Using.
IMPORTANT: Lire avant usage.
IMPORTANTE: Leer antes de usar.
Cordless Die Grinder
Meuleuse Droite Sans Fil
Rectificador Inalámbrico
DGD800
011477
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model DGD800
Max. collet capacity 6.35 mm (1/4")
Max. wheel diameter 36 mm (1-7/16")
Max. mandrel (shank) diameter 6.35 mm (1/4")
Wheel Point
Max. mandrel (shank) length 44 mm (1-3/4")
Rated speed (RPM) 26,000 /min
Overall length 402 mm (15-3/4")
Net weight 1.7 kg (3.8 lbs) 2.0 kg (4.4 lbs)
Rated voltage D.C. 18 V
Standard battery cartridge BL1815N BL1830 / BL1840
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
GEA006-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal Safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
11. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
12. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your finger on the switch or energising power tools
that have the switch on invites accidents.
13. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.

Produkt Specifikationer

Mærke: Makita
Kategori: Slibemaskine
Model: DGD800Z

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita DGD800Z stil et spørgsmål nedenfor, og andre brugere vil svare dig


Slibemaskine Makita Manualer

Makita

Makita 9562CVR Manual

12 Januar 2025
Makita

Makita DGA513Z Manual

27 September 2024
Makita

Makita GA9020KD Manual

11 September 2024
Makita

Makita GA029GD202 Manual

9 September 2024
Makita

Makita DGA469Z Manual

8 September 2024
Makita

Makita JS3201 Manual

3 September 2024
Makita

Makita JN3201 Manual

3 September 2024
Makita

Makita GA4541CT01 Manual

31 August 2024
Makita

Makita BO4566 Manual

30 August 2024
Makita

Makita BBO180 Manual

30 August 2024

Slibemaskine Manualer

Nyeste Slibemaskine Manualer

Bosch

Bosch GWS 30-180 PB Professional Manual

5 Februar 2025
Parkside

Parkside PEXS 270 A1 Manual

13 Januar 2025
Chicago Pneumatic

Chicago Pneumatic CP7255 Manual

11 Januar 2025
Bosch

Bosch GWS 18V-8 Professional Manual

5 Januar 2025
DeWalt

DeWalt DWE4115 Manual

30 December 2025
Black Decker

Black Decker 4292 Manual

30 December 2025
Powerplus

Powerplus POWX06250 Manual

30 December 2025
Hazet

Hazet 9032M-36 Manual

30 December 2025
Alpha Tools

Alpha Tools WS 230-3 Manual

28 December 2024
Einhell

Einhell WS 230-4 Manual

28 December 2024