Makita DHG181 Manual


Læs gratis den danske manual til Makita DHG181 (32 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Makita DHG181, eller vil du spørge andre brugere om produktet?

Side 1/32
INSTRUCTION MANUAL
MANUEL D'INSTRUCTION
MANUAL DE INSTRUCCIONES
Cordless Heat Gun
capeur Thermique Sans Fil
Pistola de Calor Inalámbrica
DHG180
DHG181
IMPORTANT: Read Before Using.
IMPORTANT : Lire avant usage.
IMPORTANTE: Lea antes de usar.
2 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DHG180 DHG181
Rated voltage D.C. 18 V
Temperature 550 °C ( 1,022 °F) Ambient temperature - 550 °C
(1,022 °F)
Air volume 200 L/min ( 7.1 cu.ft./min) 1: 120 L/min ( 4.2 cu.ft./min)
2: 200 L/min ( 7.1 cu.ft./min)
Dimensions (L x W x H)
with BL1860B
168 mm x 79 mm x 251 mm
(6-5/8″ x 3-1/8″ x 9-7/8″)
173 mm x 79 mm x 255 mm
(6-13/16″ x 3-1/8″ x 10″)
Net weight 1.0 - 1.3 kg (2.2 - 2.9 lbs) 1.0 - 1.4 kg (2.2 - 3.1 lbs)
Due to our continuing program of research and development, the specications herein are subject to change
without notice.
Specications and battery cartridge may di󰀨er from country to country.
The weight may di󰀨er depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
Charger
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF / DC18SH
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or re.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Warning
volts
direct current
Do not use in the rain or leave the heat gun
outdoors while raining.
Hot surfaces - Burns to ngers or hands.
Intended use
This cordless heat gun has been designed for vari-
ous of heating applications such as heat shrinking of
heat-shrinkable wrap or tubes, soldering or de-soldering
electronic components, peeling-o󰀨 self-adhesive tapes
or stickers, loosen rusted nut or bolt, shaping plastic
parts, drying, melting and unfreezing, etc.
IMPORTANT SAFETY
INSTRUCTIONS
READ THESE INSTRUCTIONS
Hidden areas such as behind walls, ceilings, oors,
so󰀩t boards and other panels may contain ammable
materials that could be ignited by the heat gun when
working in these locations. The ignition of these mate-
rials may not be readily apparent and could result in
property damage and injury to persons.
WARNING: Extreme care should be taken
when stripping paint. The peelings, residue and
vapors of paint may contain lead, which is poison-
ous. Any pre-1977 paint may contain lead and paint
applied to homes prior to 1950 is likely to contain
lead. Once deposited on surfaces, hand to mouth
contact can result in the ingestion of lead. Exposure
to even low levels of lead can cause irreversible brain
and nervous system damage; young and unborn
children are particularly vulnerable.
WARNING: Read all safety warnings and
instructions. Failure to follow the warnings and
instructions may result in electric shock, re and/or
serious injury.


Produkt Specifikationer

Mærke: Makita
Kategori: Ikke kategoriseret
Model: DHG181

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita DHG181 stil et spørgsmål nedenfor, og andre brugere vil svare dig