Makita DJN161Z Manual

Makita Ikke kategoriseret DJN161Z

Læs gratis den danske manual til Makita DJN161Z (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 84 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 42.5 anmeldelser. Har du et spørgsmål om Makita DJN161Z, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cordless Nibbler

BJN160

BJN161

013272

ENGLISH (Original instructions)

SPECIFICATIONS

Model BJN160 BJN161

Steel up to 400 N/mm2 1.6 mm / 16 ga 1.6 mm / 16 ga

Steel up to 600 N/mm2 1.2 mm / 18 ga 1.2 mm / 18 ga Max. cutting capacities

Aluminum up to 200 N/mm

2 2.5 mm / 12 ga 2.5 mm / 12 ga

Outside edge 50 mm 50 mm

Min. cutting radius Inside edge 45 mm 45 mm

Strokes per minute (min-1

) 1,900 1,900

Overall length 313 mm 313 mm

Net weight 2.1 kg 2.2 kg

Rated voltage D.C. 14.4 V D.C. 18 V

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END004-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of the European

Directives, on Waste Electric and

Electronic Equipment and Batteries and

Accumulators and Waste Batteries and

Accumulators and their implementation

in accordance with national laws,

electric equipment and batteries and

battery pack(s) that have reached the

end of their life must be collected

separately and returned to an

environmentally compatible recycling

facility.

ENE037-1

Intended use

The tool is intended for cutting sheet steel and stainless

sheet steel.

GEA006-2

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

Ni-MH

Li-ion

Produkt Specifikationer

Mærke:	Makita
Kategori:	Ikke kategoriseret
Model:	DJN161Z
Bredde:	78 mm
Dybde:	251 mm
Højde:	189 mm
Vægt:	2200 g
Produktfarve:	Black,Green,Grey
Produkttype:	Power nibbler
Batteriteknologi:	Lithium-Ion (Li-Ion)
Indgangseffekt:	- W
Strømkilde:	Batteri
Vibrationsniveau:	6.5 m/s²
Tomgangshastighed (maks.):	1900 spm
Skærekapacitet i stål (600 N / mm ²):	1.2 mm
Skærekapacitet i stål (400 N / mm ²):	1.6 mm
Skærekapacitet i stål (800 N / mm ²):	0.8 mm