Makita DMP181Z Manual

Makita Ikke kategoriseret DMP181Z

Læs gratis den danske manual til Makita DMP181Z (32 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Makita DMP181Z, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/32

INSTRUCTION MANUAL

MANUEL D'INSTRUCTION

MANUAL DE INSTRUCCIONES

Cordless Inator

Goneur sans l

Inador Inalámbrico

DMP181

IMPORTANT: Read Before Using.

IMPORTANT : Lire avant usage.

IMPORTANTE: Lea antes de usar.

2 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model: DMP181

Overall length with BL1815N 297 mm (11-3/4″)

with BL1860B 316 mm (12-1/2″)

Maximum air pressure 1,100 kPa (160 PSI)

Duty cycle 10 minutes On / 5 minutes O

Rated voltage D.C. 18 V

Net weight 2.4 - 2.8 kg (5.3 - 6.2 lbs)

•

Due to our continuing program of research and development, the specications herein are subject to change without notice.

• Specications and battery cartridge may dier from country to country.

• The weight may dier depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combinations, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Battery cartridge BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B

Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /

DC18SH

•

Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.

WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges

and chargers may cause injury and/or re.

Intended use

This tool is intended for inating tire, sport ball, or small

oating tube.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specications provided with this

power tool. Failure to follow all instructions listed below

may result in electric shock, re and/or serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical Safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodied plugs and matching outlets will

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

5. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

6. If operating a power tool in a damp location is

unavoidable, use a ground fault circuit inter-

rupter (GFCI) protected supply. Use of a GFCI

reduces the risk of electric shock.

7. Power tools can produce electromagnetic

elds (EMF) that are not harmful to the user.

However, users of pacemakers and other similar

medical devices should contact the maker of their

device and/or doctor for advice before operating

this power tool.

Produkt Specifikationer

Mærke:	Makita
Kategori:	Ikke kategoriseret
Model:	DMP181Z

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita DMP181Z stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Makita Manualer

20 Juni 2025

19 Juni 2025

19 Juni 2025

17 Juni 2025

17 Juni 2025

17 Juni 2025

17 Juni 2025

29 Marts 2025

29 Marts 2025

29 Marts 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

SKS Velo 47 Trekking Manual

1 Juli 2025

Alphacool Eisblock Aurora Radeon RX 7800 XT Reference Manual

1 Juli 2025

Mercyu MRU-161 Manual

1 Juli 2025

Ikea UTRUSTA 802.745.24 Manual

1 Juli 2025

Point POKM241 Manual

1 Juli 2025

Casio JW-200SV Manual

1 Juli 2025

Foster FMSLIM900NG Manual

1 Juli 2025

JWIN JT-P10 Manual

1 Juli 2025

Intermatic AG3000 Manual

1 Juli 2025

Haeger Elegant HB-400.021A Manual

1 Juli 2025