Makita DPJ180Z Manual

Makita Router DPJ180Z

Læs gratis den danske manual til Makita DPJ180Z (16 sider) i kategorien Router. Denne vejledning er vurderet som hjælpsom af 58 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 29.5 anmeldelser. Har du et spørgsmål om Makita DPJ180Z, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cordless Plate Joiner

BPJ140

BPJ180

012495

ENGLISH (Original instructions)

SPECIFICATIONS

Model BPJ140 BPJ180

Type of blade Plate joiner

Max. grooving depth 20 mm

No load speed (min

-1) 6,500

Overall length 351 mm

Net weight 3.0 kg

Rated voltage D.C. 14.4 V D.C. 18 V

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END004-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of the European

Directives, on Waste Electric and

Electronic Equipment and Batteries and

Accumulators and Waste Batteries and

Accumulators and their implementation

in accordance with national laws,

electric equipment and batteries and

battery pack(s) that have reached the

end of their life must be collected

separately and returned to an

environmentally compatible recycling

facility.

ENE013-1

Intended use

The tool is intended for cutting crescent shaped slots for

the placement of flat wooden dowels or biscuit by a

plunging action.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Model BPJ140

Sound pressure level (L

pA) : 73 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Model BPJ180

Sound pressure level (L

pA) : 74 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode : cutting grooves in MDF

Vibration emission (ah) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

•

The vibration emission during actual use of the power

tool can differ from the declared emission value

depending on the ways in which the tool is used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

Ni-MH

Li-ion

Produkt Specifikationer

Mærke:	Makita
Kategori:	Router
Model:	DPJ180Z
Bredde:	139 mm
Dybde:	351 mm
Højde:	149 mm
Vægt:	2800 g
Produktfarve:	Black, Stainless steel
Batteriteknologi:	Lithium-Ion (Li-Ion)
Indgangseffekt:	18 W
Strømkilde:	Batteri
Støvudledningsport:	Ja
Batteri medfølger:	Ingen
Tomgang:	6500 rpm
Justerbar skæredybde:	Ja
Høvlingsdybde (maks.):	20 mm