Makita FN001GZ02 Manual
Makita
Ikke kategoriseret
FN001GZ02
Læs nedenfor 📖 manual på dansk for Makita FN001GZ02 (16 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 14 personer og blev bedømt med 4.9 stjerner i gennemsnit af 7.5 brugere
Side 1/16
INSTRUCTION MANUAL
Cordless Brad Nailer
FN001G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: FN001G
Nail size 18Ga x 15, 20, 25, 30, 35, 40 mm
Nail magazine capacity 100 pcs.
Dimensions with BL4025, without hook (L x W x H) 265 mm x 86 mm x 243 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 2.6 - 3.2 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydierfromcountrytocountry.
• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4020* / BL4025* / BL4040 / BL4050F
* : Recommended battery
Charger DC40RA / DC40RB / DC40RC
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
andchargersmaycauseinjuryand/orre.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for fastening on interior work and
furniture work.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745-2-16:
Sound pressure level (LpA) : 81 dB(A)
Sound power level (LWA) : 92 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can dier from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value determined according to
EN60745-2-16:
Vibration emission (a
h) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
Produkt Specifikationer
| Mærke: | Makita |
| Kategori: | Ikke kategoriseret |
| Model: | FN001GZ02 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Makita FN001GZ02 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret Makita Manualer
29 Marts 2025
29 Marts 2025
29 Marts 2025
29 Marts 2025
29 Marts 2025
6 Februar 2025
12 Januar 2025
7 Januar 2025
16 December 2024
16 December 2024
Ikke kategoriseret Manualer
- Ikke kategoriseret Gill
- Ikke kategoriseret Tornado
- Ikke kategoriseret Joby
- Ikke kategoriseret Beafon
- Ikke kategoriseret Tanaka
- Ikke kategoriseret Elite
- Ikke kategoriseret ABB
- Ikke kategoriseret Dahle
- Ikke kategoriseret Jolin
- Ikke kategoriseret Axler
- Ikke kategoriseret Fysic
- Ikke kategoriseret MSR
- Ikke kategoriseret AeroCool
- Ikke kategoriseret Barska
- Ikke kategoriseret Brinsea
Nyeste Ikke kategoriseret Manualer
11 Juni 2025
11 Juni 2025
11 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025