Makita GA5021C Manual


Læs gratis den danske manual til Makita GA5021C (16 sider) i kategorien Slibemaskine. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Makita GA5021C, eller vil du spørge andre brugere om produktet?

Side 1/16
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Angle Grinder
GA5020
GA5020C
GA5021
GA5021C
GA6020
GA6020C
GA6021
GA6021C
008074
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model GA5020 GA5021 GA5020C/
GA5021C GA6020 GA6021 GA6020C/
GA6021C
Depressed center wheel diameter 125 mm 125 mm 125 mm 150 mm 150 mm 150 mm
Max. wheel thickness 6.4 mm 6.4 mm 6.4 mm 6.4 mm 6.4 mm 6.4 mm
Spindle thread M14 M14 M14 M14 M14 M14
No load speed (no) / Rated speed (n)
12,000 min
-1
12,000 min
-1
10,000 min
-1
10,000 min
-1
10,000 min
-1
9,000 min
-1
Overall length 356 mm 384 mm 390 mm 356 mm 384 mm 390 mm
Net weight 2.7 kg 2.7 kg 2.9 kg 3.0 kg 2.8 kg 3.0 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END202-7
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
DOUBLE INSULATION
Wear safety glasses.
Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of European Directive
2012/19/EU on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE048-1
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Model GA5020,GA6020 and GA6021
Sound pressure level (L
pA ) : 89 dB(A)
Sound power level (L
WA) : 100 dB(A)
Uncertainty (K) : 3 dB(A)
Model GA5020C,GA5021,GA5021C and
GA6021C
Sound pressure level (L
pA ) : 90 dB(A)
Sound power level (L
WA) : 101 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model GA6021
Work mode : surface grinding
Vibration emission (ah,AG) : 6.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode : disc sanding
Vibration emission (ah,DS) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s2
Model GA5021C
Work mode : surface grinding
Vibration emission (ah,AG) : 8.5 m/s2
Uncertainty (K) : 1.5 m/s2


Produkt Specifikationer

Mærke: Makita
Kategori: Slibemaskine
Model: GA5021C

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita GA5021C stil et spørgsmål nedenfor, og andre brugere vil svare dig




Slibemaskine Makita Manualer

Makita

Makita 9562CVR Manual

12 Januar 2025
Makita

Makita DGA513Z Manual

27 September 2024
Makita

Makita GA9020KD Manual

11 September 2024
Makita

Makita GA029GD202 Manual

9 September 2024
Makita

Makita DGA469Z Manual

8 September 2024
Makita

Makita JS3201 Manual

3 September 2024
Makita

Makita JN3201 Manual

3 September 2024
Makita

Makita GA4541CT01 Manual

31 August 2024
Makita

Makita BO4566 Manual

30 August 2024
Makita

Makita BBO180 Manual

30 August 2024

Slibemaskine Manualer

Nyeste Slibemaskine Manualer