Makita GA7040S01 Manual

Makita Slibemaskine GA7040S01

Læs gratis den danske manual til Makita GA7040S01 (16 sider) i kategorien Slibemaskine. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Makita GA7040S01, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Angle Grinder

GA7030,GA7030S

GA7040S

GA9030, GA9030S

GA9040S

007051

ENGLISH (Original instructions)

SPECIFICATIONS

Model

GA7030/GA7030S

GA7040S

GA9030/GA9030S

GA9040S

Depressed center wheel diameter 180 mm 230 mm

Spindle thread M14 M14

Rated speed (n)/ No load speed (n

0) 8,500 min-1

6,600 min-1

Overall length 511 mm 511 mm

Net weight 6.0 kg 6.4 kg 6.3 kg 6.7 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END202-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Wear safety glasses.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible recycling

facility.

ENE048-1

Intended use

The tool is intended for grinding, sanding and cutting of

metal and stone materials without the use of water.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated and can, therefore, also be used from

sockets without earth wire.

ENF100-1

For public low-voltage distribution systems of

between 220 V and 250 V.

Switching operations of electric apparatus cause voltage

fluctuations. The operation of this device under

unfavorable mains conditions can have adverse effects

to the operation of other equipment. With a mains

impedance equal or less than 0.23 Ohms it can be

presumed that there will be no negative effects. The

mains socket used for this device must be protected with

a fuse or protective circuit breaker having slow tripping

characteristics.

For Model GA7030,GA7030S

ENG102-3

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 89 dB(A)

Sound power level (L

WA) : 100 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG208-5

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode : surface grinding

Vibration emission (ah,AG) : 6.5 m/s2

Uncertainty (K) : 1.5 m/s2

The declared vibration emission value has been

measured in accordance with the standard test method

and may be used for comparing one tool with another.

The declared vibration emission value may also be used

in a preliminary assessment of exposure.

The declared vibration emission value is used for main

applications of the power tool. However if the power tool

is used for other applications, the vibration emission

value may be different.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

Produkt Specifikationer

Mærke:	Makita
Kategori:	Slibemaskine
Model:	GA7040S01

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita GA7040S01 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Slibemaskine Makita Manualer

Makita 9562CVR Manual

12 Januar 2025

Makita DGA513Z Manual

27 September 2024

Makita GA9020KD Manual

11 September 2024

Makita GA029GD202 Manual

9 September 2024

Makita DGA469Z Manual

8 September 2024

Makita JS3201 Manual

3 September 2024

Makita JN3201 Manual

3 September 2024

Makita GA4541CT01 Manual

31 August 2024

Makita BO4566 Manual

30 August 2024

Makita BBO180 Manual

30 August 2024

Slibemaskine Manualer

Nyeste Slibemaskine Manualer

Bosch GWS 30-180 PB Professional Manual

5 Februar 2025

Parkside PEXS 270 A1 Manual

13 Januar 2025

Chicago Pneumatic CP7255 Manual

11 Januar 2025

Bosch GWS 18V-8 Professional Manual

5 Januar 2025

DeWalt DWE4115 Manual

30 December 2025

Black Decker 4292 Manual

30 December 2025

Powerplus POWX06250 Manual

30 December 2025

Hazet 9032M-36 Manual

30 December 2025

Alpha Tools WS 230-3 Manual

28 December 2024

Einhell WS 230-4 Manual

28 December 2024