Makita GA9071X1 Manual

Makita Ikke kategoriseret GA9071X1

Læs gratis den danske manual til Makita GA9071X1 (20 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Makita GA9071X1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

INSTRUCTION MANUAL

Angle Grinder

GA7070

GA7071

GA9070

GA9071

ENGLISH: Original instructions

DOUBLE INSULATION

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: GA7070 GA7071 GA9070 GA9071

Wheel diameter 180mm 230mm

Max. wheel thickness 7.2mm 6.5mm

Spindle thread M14 or 5/8″ (country specic)

Rated speed (n) 8,500min-1 6,600min-1

Overall length 506mm

Switch handle Bar type D type Bar type D type

Net weight 6.1 - 6.6 kg 6.2 - 6.7 kg 6.3 - 8.5 kg 6.4 - 8.5 kg

Safety class /II

• Due to our continuing program of research and development, the specications herein are subject to change

without notice.

• Specications may di󰀨er from country to country.

• The weight may di󰀨er depending on the attachment(s). The lightest and heaviest combination, according to

EPTA-Procedure 01/2014, are shown in the table.

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Read instruction manual.

Wear safety glasses.

DOUBLE INSULATION

Only for EU countries

Due to the presence of hazardous compo-

nents in the equipment, used electrical and

electronic equipment may have a negative

impact on the environment and human health.

Do not dispose of electrical and electronic

appliances with household waste!

In accordance with the European Directive

on waste electrical and electronic equipment

and its adaptation to national law, used

electrical and electronic equipment should

be collected separately and delivered to

a separate collection point for municipal

waste, operating in accordance with the

environmental protection regulations.

This is indicated by the symbol of the

crossed-out wheeled bin placed on the

equipment.

Intended use

The tool is intended for grinding, sanding and cutting of

metal and stone materials without the use of water.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745-2-3:

Model GA7070

Sound pressure level (L

pA) : 92 dB(A)

Sound power level (L

WA) : 103 dB (A)

Uncertainty (K) : 3 dB(A)

Model GA7071

Sound pressure level (L

pA) : 91 dB(A)

Sound power level (L

WA) : 102 dB (A)

Uncertainty (K) : 3 dB(A)

Model GA9070

Sound pressure level (L

pA) : 91 dB(A)

Sound power level (L

WA) : 102 dB (A)

Uncertainty (K) : 3 dB(A)

Model GA9071

Sound pressure level (L

pA) : 91 dB(A)

Sound power level (L

WA) : 102 dB (A)

Uncertainty (K) : 3 dB(A)

NOTE: The declared noise emission value(s) has

been measured in accordance with a standard test

method and may be used for comparing one tool with

another.

NOTE: The declared noise emission value(s)

may also be used in a preliminary assessment of

exposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual

use of the power tool can di󰀨er from the declared

value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

o󰀨 and when it is running idle in addition to the

trigger time).

Produkt Specifikationer

Mærke:	Makita
Kategori:	Ikke kategoriseret
Model:	GA9071X1

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita GA9071X1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Makita Manualer

20 Juni 2025

19 Juni 2025

19 Juni 2025

17 Juni 2025

17 Juni 2025

17 Juni 2025

17 Juni 2025

29 Marts 2025

29 Marts 2025

29 Marts 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

SKS Velo 47 Trekking Manual

1 Juli 2025

Alphacool Eisblock Aurora Radeon RX 7800 XT Reference Manual

1 Juli 2025

Mercyu MRU-161 Manual

1 Juli 2025

Ikea UTRUSTA 802.745.24 Manual

1 Juli 2025

Point POKM241 Manual

1 Juli 2025

Casio JW-200SV Manual

1 Juli 2025

Foster FMSLIM900NG Manual

1 Juli 2025

JWIN JT-P10 Manual

1 Juli 2025

Intermatic AG3000 Manual

1 Juli 2025

Haeger Elegant HB-400.021A Manual

1 Juli 2025