Makita GN900SE Manual

Makita Hæftemaskine GN900SE

Læs gratis den danske manual til Makita GN900SE (12 sider) i kategorien Hæftemaskine. Denne vejledning er vurderet som hjælpsom af 52 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 26.5 anmeldelser. Har du et spørgsmål om Makita GN900SE, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cordless Clipped Head Framing

Nailer

GN900

009440

ENGLISH (Original instructions)

SPECIFICATIONS

Model GN900

Nail length X Shank diameter Nail L :50 mm - 90 mm d : 2.9 mm - 3.3 mm

Nail capacity 40 nails (1strip)

Nail collation angle (degree) 34

Figure of nail head Clipped

Dimensions (L X H X W) 321 mm X 108 mm X 368 mm

Net weight 3.3 kg

Rated voltage D.C. 7.2 V

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END107-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Container under pressure, keep away

from temperatures over 50℃ (for ex.

sun radiation) Keep container in a well

ventilated place.

･ Use only outside or well ventilated

rooms. Do not breathe gas.

･ Do not use near flames or sprays on

heated surfaces. In use, may form

flammable/explosive vapour-air mixture.

･ Do not damage, puncture or burn even

after use.

･ Wear safety glasses.

･ Keep fingers away from trigger when not

driving fasteners to avoid accidental

firing.

･ Use only in ventilated area to avoid

nausea and unconsciousness. Never

use tool in combustible atmospheres.

The tool exhaust may ignite flammable

materials.

･ Do not use on scaffoldings, ladders.

･ Warning: hot surface!

Do not touch around this symbol.

Touching the surface may cause burns

or injuries.

･ Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment, 2006/66/EC on

batteries and accumulators and waste

batteries and accumulators and their

implementation in accordance with

national laws, electric equipment and

battery pack that have reached the end

of their life must be collected separately

and returned to an environmentally

compatible recycling facility.

ENE059-1

Intended use

The tool is intended for the preliminary interior work such

as fixing floor joists or common rafters and framing work

in 2 “x 4” housing.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN792:

Sound pressure level (L

pA) : 89 dB(A)

Sound power level (L

WA) : 102 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG904-1

Vibration

The vibration emission value determined according to

EN792:

Vibration emission (ah) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

Ni-MH

Li-ion

Produkt Specifikationer

Mærke:	Makita
Kategori:	Hæftemaskine
Model:	GN900SE
Bredde:	321 mm
Dybde:	108 mm
Højde:	368 mm
Vægt:	3200 g
Produktfarve:	Black, Blue
Batterispænding:	7.2 V
Batterikapacitet:	1 At
Batteriteknologi:	Lithium-Ion (Li-Ion)
Maksimalt driftstryk:	- bar
Strømkilde:	Pneumatisk
Understøtter forskellige sømlængder:	50 - 80 mm
Magasin, kapacitet:	44
Søm, understøttet diameter:	2.8 - 3.3 mm