Makita GS5000 Manual

Makita Slibemaskine GS5000

Læs gratis den danske manual til Makita GS5000 (12 sider) i kategorien Slibemaskine. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Makita GS5000, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Straight Grinder

GS5000

GS6000

013595

ENGLISH (Original instructions)

SPECIFICATIONS

Model GS5000 GS6000

Maximum wheel capacity (diameter X thickness) 125 mm × 20 mm 150 mm × 20 mm

Spindle thread M14 or 1/2" (country specific)

No load speed (min

-1) 5,600

With support cover 590 mm 590 mm

Overall length Without support cover 588 mm 588 mm

With support cover 5.0 kg 5.2 kg

Net weight Without support cover 4.9 kg 5.0 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END202-8

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Wear safety glasses.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste

material!

In observance of the European

Directive, on Waste Electric and

Electronic Equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE050-1

Intended use

The tool is intended for grinding ferrous materials or

deburring castings.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

Model GS5000, GS6000

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Sound pressure level (L

pA) : 83 dB(A)

Sound power level (L

WA) : 94 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : surface grinding

Vibration emission (ah,SG) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG902-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

• The declared vibration emission value is used for

main applications of the power tool. However if the

power tool is used for other applications, the

vibration emission value may be different.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

Produkt Specifikationer

Mærke:	Makita
Kategori:	Slibemaskine
Model:	GS5000

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita GS5000 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Slibemaskine Makita Manualer

Makita 9500D Manual

28 Marts 2025

Makita 9562CVR Manual

12 Januar 2025

Makita DGA513Z Manual

27 September 2024

Makita GA9020KD Manual

11 September 2024

Makita GA029GD202 Manual

9 September 2024

Makita DGA469Z Manual

8 September 2024

Makita JS3201 Manual

3 September 2024

Makita JN3201 Manual

3 September 2024

Makita GA4541CT01 Manual

31 August 2024

Makita BO4566 Manual

30 August 2024

Slibemaskine Manualer

Nyeste Slibemaskine Manualer

Einhell BT-MG 160 KIT Manual

29 Marts 2025

Kraftronic KT-WS 2000 Manual

29 Marts 2025

Kraftronic KT-WS 750 Set Manual

29 Marts 2025

NEO Tools 14-014 Manual

28 Marts 2025

Bosch GWS 30-180 PB Professional Manual

5 Februar 2025

Metabo WVBF 18 LT BL 11-125 Quick Manual

1 Februar 2025

Parkside PEXS 270 A1 Manual

13 Januar 2025

Chicago Pneumatic CP7255 Manual

11 Januar 2025

Bosch GWS 18V-8 Professional Manual

5 Januar 2025

DeWalt DWE4115 Manual

30 December 2025