Makita HR3540C Manual

Makita Borehammer HR3540C

Læs gratis den danske manual til Makita HR3540C (12 sider) i kategorien Borehammer. Denne vejledning er vurderet som hjælpsom af 61 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 31 anmeldelser. Har du et spørgsmål om Makita HR3540C, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

WARNING:

For your personal safety, READ and UNDERSTAND before using.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Combination Hammer

HR3540C

HR3541FC

008719

ENGLISH (Original instructions)

SPECIFICATIONS

Model HR3540C HR3541FC

Tungsten-carbide tipped bit 35 mm

Concrete Core bit 90 mm

Steel 13 mm

Capacities

Wood 32 mm

No load speed (min

-1) 315 - 630

Blows per minute 1,650 - 3,300

Overall length 439 mm

Net weight 5.2 kg 5.6 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE044-1

Intended use

The tool is intended for hammer drilling in brick, concrete

and stone as well as for chiselling work.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated in accordance with European

Standard and can, therefore, also be used from sockets

without earth wire.

For Model HR3540C

ENG102-3

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 93 dB(A)

Sound power level (L

WA) : 104 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG215-2

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : chiseling function

Vibration emission (ah,CHeq) : 12.5 m/s2

Uncertainty (K) : 1.5 m/s2

ENG303-2

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 18.0 m/s2

Uncertainty (K) : 1.5 m/s2

ENG301-1

Work mode : drilling into metal

Vibration emission (ah,D) : 2.5 m/s

Uncertainty (K) : 1.5 m/s2

For Model HR3541FC

ENG102-3

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 91 dB(A)

Sound power level (L

WA) : 102 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

Produkt Specifikationer

Mærke:	Makita
Kategori:	Borehammer
Model:	HR3540C
Bredde:	108 mm
Dybde:	439 mm
Højde:	239 mm
Vægt:	5200 g
Produktfarve:	Black,Turquoise
Ledningslængde:	5 m
Borepatron type:	SDS Max
Indgangseffekt:	850 W
Strømkilde:	Vekselstrøm
Tomgang (maks.):	630 rpm
Bore diameter, stål (maks.):	13 mm
Bore diameter, træ (maks.):	32 mm
Bore diameter, beton (maks.):	35 mm
Slagboring:	Ja
Energi ved slagkraft:	6.3 J
Slagkraft:	3300 bpm or slag i minuttet
Spændepatron:	Ja