Makita KP0810CK Manual
Makita
Høvlemaskine
KP0810CK
Læs nedenfor 📖 manual på dansk for Makita KP0810CK (12 sider) i kategorien Høvlemaskine. Denne guide var nyttig for 26 personer og blev bedømt med 4.5 stjerner i gennemsnit af 13.5 brugere
Side 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Power Planer
KP0810
KP0810C
007638
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model KP0810 KP0810C
Planing width 82 mm
Planing depth 4 mm
Shiplapping depth 25 mm
No load speed (min
-1) 16,000 12,000
Overall length 290 mm
Net weight 3.3 kg 3.4 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-5
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
ENE001-1
Intended use
The tool is intended for planing wood.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model KP0810
Sound pressure level (L
pA) : 88 dB(A)
Sound power level (L
WA) : 99 dB(A)
Uncertainty (K) : 3 dB(A)
Model KP0810C
Sound pressure level (L
pA) : 82 dB(A)
Sound power level (L
WA) : 93 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model KP0810
Work mode : planing softwood
Vibration emission (ah) : 3.0 m/s2
Uncertainty (K) : 1.5 m/s2
Model KP0810C
Work mode : planing softwood
Vibration emission (ah) : 3.5 m/s2
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
Produkt Specifikationer
| Mærke: | Makita |
| Kategori: | Høvlemaskine |
| Model: | KP0810CK |
Har du brug for hjælp?
Hvis du har brug for hjælp til Makita KP0810CK stil et spørgsmål nedenfor, og andre brugere vil svare dig
Høvlemaskine Makita Manualer
6 Oktober 2024
23 September 2024
14 August 2024
26 Juli 2024
22 Juli 2024
20 Juli 2024
18 Juli 2024
9 Juli 2024
9 Juli 2024
5 Juli 2024
Høvlemaskine Manualer
- Høvlemaskine Metabo
- Høvlemaskine Ergotools Pattfield
- Høvlemaskine Meec Tools
- Høvlemaskine Bosch
- Høvlemaskine McKenzie
- Høvlemaskine Stihl
- Høvlemaskine Black Decker
- Høvlemaskine Varo
- Høvlemaskine Bavaria
- Høvlemaskine Protool
- Høvlemaskine Ozito
- Høvlemaskine Prowork
- Høvlemaskine DeWalt
- Høvlemaskine Gamma
- Høvlemaskine Herkules
Nyeste Høvlemaskine Manualer
24 November 2024
24 November 2024
24 November 2024
20 September 2024
15 September 2024
6 September 2024
6 September 2024
6 September 2024
6 September 2024
2 September 2024