Makita RP0910 Manual

Makita Overfræsere RP0910

Læs gratis den danske manual til Makita RP0910 (12 sider) i kategorien Overfræsere. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Makita RP0910, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

Router / Electronic Router

RP0910

RP1110C

IMPORTANT: Read Before Using.

RP0910 RP1110C

015287

ENGLISH (Original instructions)

SPECIFICATIONS

Model RP0910 RP1110C

Collet chuck capacity 8 mm or 1/4" 8 mm or 1/4"

Plunge capacity 0 - 57 mm 0 - 57 mm

No load speed (min

-1) 27,000 8,000 - 24,000

Overall height 260 mm 260 mm

Net weight 3.3 kg 3.4 kg

Safety class /II /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-7

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of the European

Directive, on Waste Electric and

Electronic Equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE010-1

Intended use

The tool is intended for flush trimming and profiling of

wood, plastic and similar materials.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Model RP0910

Sound pressure level (L

pA) : 83 dB (A)

Sound power level (L

WA) : 94 dB (A)

Uncertainty (K) : 3 dB (A)

Model RP1110C

Sound pressure level (L

pA) : 81 dB (A)

Sound power level (L

WA) : 92 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Model RP0910

Work mode : cuttig grooves in MDF

Vibration emission (ah) : 8.0 m/s2

Uncertainty (K) : 1.5 m/s2

Model RP1110C

Work mode : cuttig grooves in MDF

Vibration emission (ah) : 5.0 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

•

The vibration emission during actual use of the power

tool can differ from the declared emission value

depending on the ways in which the tool is used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

Produkt Specifikationer

Mærke:	Makita
Kategori:	Overfræsere
Model:	RP0910

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita RP0910 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Overfræsere Makita Manualer

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

5 Oktober 2022

Overfræsere Manualer

Nyeste Overfræsere Manualer

DeWalt DCW600 Manual

5 Oktober 2022

FERM PRM1005 Manual

5 Oktober 2022

FERM PRM1021 Manual

5 Oktober 2022

Black And Decker KW850E Manual

5 Oktober 2022

Black And Decker KW900E Manual

5 Oktober 2022

Worx WX15RT.1 Manual

5 Oktober 2022

Festool OF 1010 Q Manual

5 Oktober 2022

Festool OF 1010 EQ Manual

5 Oktober 2022

FERM PRM1003 Manual

5 Oktober 2022

FERM PRA1011 Manual

5 Oktober 2022