Makita RT0702CX2 Manual

Makita Ikke kategoriseret RT0702CX2

Læs gratis den danske manual til Makita RT0702CX2 (24 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Makita RT0702CX2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

INSTRUCTION MANUAL

Trimmer

RT0702C

ENGLISH: Original instructions

DOUBLE INSULATION

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: RT0702C

Collet chuck capacity 6 mm, 8 mm, or 1/4″

No load speed 10,000 - 34,000 min

-1

Overall height 210 mm

Net weight 1.8 - 2.8 kg

Safety class /II

• Due to our continuing program of research and development, the specications herein are subject to change

without notice.

• Specications may di󰀨er from country to country.

• The weight may di󰀨er depending on the attachment(s). The lightest and heaviest combination, according to

EPTA-Procedure 01/2014, are shown in the table.

Symbols

The followings show the symbols which may be used

for the equipment. Be sure that you understand their

meaning before use.

Read instruction manual.

Wear safety glasses.

DOUBLE INSULATION

Only for EU countries

Due to the presence of hazardous compo-

nents in the equipment, used electrical and

electronic equipment may have a negative

impact on the environment and human

health.

Do not dispose of electrical and electronic

appliances with household waste!

In accordance with the European Directive

on waste electrical and electronic equip-

ment and its adaptation to national law,

used electrical and electronic equipment

should be collected separately and

delivered to a separate collection point

for municipal waste, operating in accor-

dance with the environmental protection

regulations.

This is indicated by the symbol of the

crossed-out wheeled bin placed on the

equipment.

Intended use

The tool is intended for ush trimming and proling of

wood, plastic and similar materials.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

Noise

The typical A-weighted noise level determined accord-

ing to EN62841-2-17:

Sound pressure level (L

pA) : 82 dB(A)

Sound power level (L

WA) : 93 dB (A)

Uncertainty (K) : 3 dB(A)

NOTE: The declared noise emission value(s) has

been measured in accordance with a standard test

method and may be used for comparing one tool with

another.

NOTE: The declared noise emission value(s)

may also be used in a preliminary assessment of

exposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual

use of the power tool can di󰀨er from the declared

value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

o󰀨 and when it is running idle in addition to the

trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-2-17:

Work mode: rotation without load

Vibration emission (a

h) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

NOTE: The declared vibration total value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE: The declared vibration total value(s) may also

be used in a preliminary assessment of exposure.

Produkt Specifikationer

Mærke:	Makita
Kategori:	Ikke kategoriseret
Model:	RT0702CX2

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita RT0702CX2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Makita Manualer

29 Marts 2025

29 Marts 2025

29 Marts 2025

29 Marts 2025

29 Marts 2025

Makita BL4040F Manual

6 Februar 2025

Makita MR007GZ Manual

12 Januar 2025

Makita TW010G Manual

7 Januar 2025

Makita UT002G Manual

16 December 2024

Makita UM164D Manual

16 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vulcan 1024W Manual

15 Juni 2025

Backyard Pro 554PL2030 Manual

15 Juni 2025

Haier 1U18TE2HDA Manual

15 Juni 2025

AEG EWKEXT1 Manual

15 Juni 2025

Planet XGPN-400AXV Manual

15 Juni 2025

Cadac 3 Cook Turbo Manual

15 Juni 2025

Bobrick B-3944 Manual

15 Juni 2025

Sony SZC-4008 Manual

15 Juni 2025

Watts ETX-15 Manual

15 Juni 2025

Sigma REMOTE ONE Manual

15 Juni 2025