Makita TM3000CX4 Manual

Makita Multiværktøj TM3000CX4

Læs gratis den danske manual til Makita TM3000CX4 (21 sider) i kategorien Multiværktøj. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Makita TM3000CX4, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/21

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Multi Tool

TM3000C

012849

ENGLISH (Original instructions)

SPECIFICATIONS

Model TM3000C

Oscillation per minute 6,000 - 20,000 (min

-1)

Oscillation angle, left/right 1.6 ﾟ (3.2 ﾟ total)

Overall length 275 mm

without dust extraction attachment

1.4 kg

Net weight

with dust extraction attachment

1.5 kg

Safety class /II

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END202-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Wear safety glasses.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible recycling

facility.

ENE080-1

Intended use

The tool is intended for sawing and cutting wood, plastic,

gypsum, non-ferrous metals, and fastening elements (e.

g. unhardened nails and staples). It is also intended for

working soft wall tiles, as well as dry sanding and

scraping of small surfaces. It is especially for working

close to edge and flush cutting.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Work mode: Sanding

Sound pressure level (L

pA) : 74 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Work mode: Cutting with plunge cut saw blade

Sound pressure level (L

pA) : 78 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Work mode: Cutting with segmental saw blade

Sound pressure level (L

pA) : 76 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Work mode: Scraping

Sound pressure level (L

pA) : 77 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode: Sanding

Vibration emission (ah) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

Work mode: Cutting with plunge cut saw blade

Vibration emission (ah) : 6.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: Cutting with segmental saw blade

Vibration emission (ah) : 3.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: Scraping

Vibration emission (ah) : 5.5 m/s2

Uncertainty (K) : 1.5 m/s2

Produkt Specifikationer

Mærke:	Makita
Kategori:	Multiværktøj
Model:	TM3000CX4
Vekselstrømsindgangsspænding:	110 - 240 V
Vægt:	1400 g
Produktfarve:	Black, Blue
Indbygget lys:	Ingen
Indgangseffekt:	320 W
Strømkilde:	Vekselstrøm
Bæretaske:	Ja
Justerbar hastighed:	Ja
Vibrationsniveau (slibning):	2.5 m/s²
Tomgangssvingningshastighed (maks.):	20000 OPM
Tomgangssvingningshastighed (min.):	6000 OPM
Oscillationsvinkel:	3.2 °
Multi-værktøj applikationer:	Cutting, Grinding, Sawing
Vibrationsniveau (træskæring):	6.5 m/s²
Multi værktøjshovedet inkluderet:	Ja
Dykkebeskæringssavblade inkluderet:	Ja