Makita TW008GZ Manual


Læs gratis den danske manual til Makita TW008GZ (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 21 anmeldelser. Har du et spørgsmål om Makita TW008GZ, eller vil du spørge andre brugere om produktet?

Side 1/16
INSTRUCTION MANUAL
Cordless Impact Wrench
TW007G
TW008G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: TW007G TW008G
Fastening capacities Standard bolt M10 - M24
High tensile bolt M10 - M16
Square drive 12.7 mm
No load speed Max impact mode (4) 0 - 2,300 min
-1
Hard impact mode (3) 0 - 1,900 min
-1
Medium impact mode (2) 0 - 1,200 min
-1
Soft impact mode (1) 0 - 600 min
-1
Impacts per minute Max impact mode (4) 0 - 2,900 min
-1
Hard impact mode (3) 0 - 2,700 min
-1
Medium impact mode (2) 0 - 1,900 min
-1
Soft impact mode (1) 0 - 1,200 min
-1
Overall length (with battery cartridge BL4040) 170 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 2.7 - 3.3 kg
Due to our continuing program of research and development, the specications herein are subject to change without notice.
Specications may dier from country to country.
The weight may dier depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4020* / BL4025* / BL4040* / BL4050F
* : Recommended battery
Charger DC40RA / DC40RB / DC40RC
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or re.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Ni-MH
Li-ion
Only for EU countries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household waste!
In accordance with the European Directive
on waste electrical and electronic equipment
and on accumulators and batteries and
waste accumulators and batteries, as well as
their adaptation to national law, waste elec-
trical equipment, batteries and accumulators
should be stored separately and delivered
to a separate collection point for municipal
waste, operating in accordance with the
regulations on environmental protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Intended use
The tool is intended for fastening bolts and nuts.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-2:
Model TW007G
Sound pressure level (L
pA) : 97 dB(A)
Sound power level (L
WA) : 108 dB (A)
Uncertainty (K) : 3 dB(A)
Model TW008G
Sound pressure level (L
pA) : 97 dB(A)
Sound power level (L
WA) : 108 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.


Produkt Specifikationer

Mærke: Makita
Kategori: Ikke kategoriseret
Model: TW008GZ
Bredde: 86 mm
Dybde: 170 mm
Højde: 291 mm
Vægt: 3900 g
Brugervejledning: Ja
Produktfarve: Black, Green
Batterispænding: 40 V
Motortype: Børstefri
Indbygget lys: Ingen
Produkttype: Momentnøgle
Batteriteknologi: Lithium-Ion (Li-Ion)
Strømkilde: Batteri
Tomgang (min.): 0 rpm
Tomgang (maks.): 2300 rpm
Numre af batterier medfølger: 1 stk
Udskifteligt batteri: Ja
Justerbar hastighed: Ja
Omvendt: Ja
Maksimal torsion: 1100 Nm
Batteri medfølger: Ja
Tomgangshastighed (1. gear): 600 rpm
Tomgangshastighed (2. gear): 1200 rpm
Ophængelig: Ja
Tomgangseffekt (maks.): 2900
Tomgangshastighed (3. gear): 1900 rpm
Drev størrelse: 1/2 "
Drejningsmoment (min.): 760 Nm
Luftindtagstråd: 12.7 (1/2") mm
Slagfrekvens ubelastet (min.): 1200

Har du brug for hjælp?

Hvis du har brug for hjælp til Makita TW008GZ stil et spørgsmål nedenfor, og andre brugere vil svare dig