Makita UC3520A Manual

Makita Kædesave UC3520A

Læs gratis den danske manual til Makita UC3520A (20 sider) i kategorien Kædesave. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Makita UC3520A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/20

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Chain Saw

UC3020A

UC3520A

UC4020A

006906

ENGLISH (Original instructions)

SPECIFICATIONS

Model UC3020A UC3520A UC4020A

Max. chain speed (m/s) 13.3

Cutting length 300 mm 350 mm 400 mm

Type 90SG

Saw chain Pitch 3/8"

Oil pump Automatic

Oil tank capacity (l) 0.20

Power transmission Direct

Chain brake Manual

Run-down brake Mechanical

Overall length (without guide bar) 436 mm

Net weight 4.3 kg 4.4 kg

Extension cable (optional) DIN 57282/HO 7RN -F L=30 m max.,3x1.5 mm

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END218-5

Symbol

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual and follow the

warnings and safety instructions.

･ Wear eye protection.

･ Wear ear protection.

･ DOUBLE INSULATION

･ Caution: particular care and attention

required!

･ Caution: withdraw the mains plug

immediately if the cable is damaged!

･ Caution: kickback!

･ Protect against rain and damp!

･ Wear a helmet, goggles and ear

protection!

･ Wear safety gloves!

･ Withdraw the mains plug!

･ First aid

･ Maximum permissible length of cut

･ Direction of chain travel

･ Chain oil

･ Chain brake released

･ Chain brake applied

･ Prohibited!

･ Only for EU countries

Do not dispose of electric equipment

together with household waste

material!

In observance of European Directive

2012/19/EU on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE031-1

Intended use

The tool is intended for cutting lumbers and logs.

ENF002-2

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated and can, therefore, also be used

from sockets without earth wire.

Produkt Specifikationer

Mærke:	Makita
Kategori:	Kædesave
Model:	UC3520A
Bredde:	436 mm
Højde:	244 mm
Vægt:	3800 g
Produktfarve:	Black, Blue
Strøm:	1800 W
Strømkilde:	Vekselstrøm
Længde:	200 mm
Kæde, deling:	3/8 "
Automatisk oliering:	Ja
Kæde, længde:	350 mm
Kæde, hastighed:	13.3 m/s