Manhattan QuickDock Duo 130479 Manual

Manhattan Vugge/dockingstation QuickDock Duo 130479

Læs gratis den danske manual til Manhattan QuickDock Duo 130479 (12 sider) i kategorien Vugge/dockingstation. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Manhattan QuickDock Duo 130479, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
QUICKDOCK DUO
INSTRUCTIONS
MODEL 130479
MAN-130479-UM-ML1-0915-01-0
manhattanproducts.com
Important: Read before use. • Importante: Leer antes de usar.
2
ENGLISH
QuickDock Duo English
• Don’t turn opower to the Dock or remove a drive while any LED is blinking; that is, while any
data transfer is still in progress.
• Cloning time depends on the transfer rate: for example, 100 GB / SATA @ 60 MBps would take
about a half hour.
• For specications, go to manhattanproducts.com.
Read from / Write to an external drive
A Quick Dock is commonly used simply to work
directly on an external hard disk drive (HDD).
1. Use the included power adapter to connect
the DC Input jack (C) to an AC outlet.
2. Use the included USB cable to connect the
Dock (D) to your computer.
3. Set the Mode switch (E) on the back to PC.
4. Using one of the spacers (J) if needed, insert
an external drive (2.5” or 3.5”) into the Dock
(A or B).
5. Press the On/O button ( ) and make sure F
the R/W Power LED (G) lights. When the
external drive displays on your
computer, you can read or write
directly to it.
Cloning: Copying a hard disk drive
(HDD) without using a PC
1. Use the included power adapter to
connect the DC Input jack ( ) to an C
AC outlet. If necessary, disconnect
the Dock from your computer (D).
2. Set the Mode switch (E) on the back
to Clone.
3.
Insert the source drive you’re copying
from (A) and the target drive you’re
copying ( ). Note: The capacity of to B
the target drive must be greater than that of the source drive. Any data
already on the target drive will be lost.
4. Press the On/O button ( ) and make sure the R/W Power LED ( ) lights.F G
5.
Press the Clone button (H) twice. The LEDs ( ) indicate the progress (25-100%).I
All four LEDs light when the copying process is complete.
6. Turn the power o; remove the drives.
G
H
Clone
100
%
75
%
50
%
25
%
R/W
Power
I
USB
3.0
C DEF
PC Clone
On/
Off
DC
Input
B
J
A

Produkt Specifikationer

Mærke: Manhattan
Kategori: Vugge/dockingstation
Model: QuickDock Duo 130479

Har du brug for hjælp?

Hvis du har brug for hjælp til Manhattan QuickDock Duo 130479 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vugge/dockingstation Manhattan Manualer

Manhattan

Manhattan 190398 Manual

2 Februar 2025
Manhattan

Manhattan 166560 Manual

29 December 2024
Manhattan

Manhattan 190305 Manual

4 September 2024
Manhattan

Manhattan 153959 Manual

31 August 2024
Manhattan

Manhattan 153966 Manual

31 August 2024
Manhattan

Manhattan Orbit Manual

15 August 2024
Manhattan

Manhattan 151825 Manual

14 August 2024
Manhattan

Manhattan 165327 Manual

13 August 2024
Manhattan

Manhattan Atom Manual

12 August 2024
Manhattan

Manhattan SATA Quick Dock Manual

11 August 2024

Vugge/dockingstation Manualer

Nyeste Vugge/dockingstation Manualer

Bigben

Bigben CBLNEONFLAMS Manual

31 Marts 2025
Crestron

Crestron TSR-310-DS Manual

26 Marts 2025
Havit

Havit SK900BT Manual

12 Marts 2025
LogiLink

LogiLink UA0410 Manual

10 Marts 2025
Alogic

Alogic DX2 Manual

10 Februar 2025
Magnavox

Magnavox MMA3645 Manual

7 Januar 2025
Magnavox

Magnavox MMA3639 Manual

7 Januar 2025
BenQ

BenQ beCreatus GR10 Manual

3 Januar 2025
IOPLEE

IOPLEE IOPEXTSPKER405G Manual

2 Januar 2025
LogiLink

LogiLink QP0027 Manual

1 Januar 2025