1. Rotate the clock cover in anti-clockwise to release the clock unit
2. Rotate the time adjust knob to set the current time.
3. Release the insulation sheet from the battery compartment.
4. Put the clock unit back to main unit and rotate it in clockwise.
1. Be Sure the power cable is connect with the power outlet.
2. Place the radio on flat and open area for best reception.
3. Switch on the radio and select between AM / FM / AUX. The power
4. Adjust the volume by turning the volume knob.
5. Adjust the Tuning Knob for desired station.
6. Reception can be improved by extending the FM wire Antenna.
- The apparatus shall not be exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be placed on apparatus.
- To be completely disconnect the power input, the mains plug of apparatus
shall be disconnected from the mains.
” as the disconnect devices is the mains
- “The mains plug of apparatus should not be obstructed OR should be easily
accessed during intended use.”
* minimum 20mm distances around the apparatus for sufficient ventilations.
* the ventilation should not be impeded by covering the ventilation openings
with items such as newspaper, table-cloths, curtains etc.
* no naked flame sources such as lighted candles should be placed on the
* attention should be drawn to the environmental aspects of battery disposal
* the use of apparatus in moderate climates
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
WOODEN AM /FM CLOCK RADIO
1.Turn the switch to USB and turn the volume knob open the power.
2 Insert USB disk into the USB socket, it works immediately if Mp3.
available in the U disk, the unit will check the SD/MMC/TF socket
automatically if there is no USB, and will play the available Mp3
immediately if with SD/MMC/TF card inserted. Press one time to
pause and twice to player, repeat the operation until press REPEAT
to stop. Press for the last music and for next.
3 Press Mode button to choose USB/SD/MMC/TF/AUX. .
