English 
 
Box Contents 
 
Microphone 
Pop Filter 
Mic Stand 
Quickstart Guide 
Safety & Warranty Manual 
 
Mic Setup 
 
1. Follow the  setup  instructions for your operating system in the Audio Setup
section. 
2. Use the integrated USB-A cable to connect the USB Port to your device. 
3. Connect headphones to the Headphone Output on your device.  
4. Ensure  the  pop  filter  is  secured.  Position  the  pop  filter  close  to,  but  not 
touching,  the  microphone.  Angle  the  microphone  and  pop  filter  to  the  10 
o'clock or 2 o'clock position to the reduce pops. 
Note:  To  remove  the  pop  filter,  gently  push  the  badge  at  the  top  of  the 
screen  until  it  pops  out  of  the  frame  holding  it  in  place.  To  re-attach  the 
screen, snap it back into place inside the frame. 
5. (Optional) Adjust the pad switch from 0 dB to -10 dB to reduce the output 
of the microphone if recording a loud source.   
  
Audio Setup 
 
To set Umpire as  your default audio  recording  device, follow these directions for 
your device/operating system: 
 
Windows 
 
1. Use the integrated USB cable to connect Umpire to your computer. 
2. In  the  Taskbar,  locate  the  Volume  Control  "speaker"  icon.  Right-click  the 
speaker  and  select  Playback  Devices.  Alternatively,  go  to  Start  Menu  > 
Control  Panel  (or  Settings  >  Control  Panel  in  Classic  View)  >  Hardware 
and Sound > Sound. 
3. In the Windows Sound control panel select the Playback tab and select your 
computer soundcard as the default device. 
4. Click the Recording tab and select Umpire USB Microphone as the default 
device. 
5. Click Properties in the lower right-hand corner. Click the Advanced tab and 
select 2-channel, 24-bit, 48000 Hz (Studio Quality) as the default format. 
Note: Although Umpire supports up to 24-bit audio, the microphone's output 
is 16-bit only. 
6. Uncheck both boxes under Exclusive Mode. 
7. Click  OK to  close  the  Properties  window  and  click  OK  to  close  the  Sound 
control panel. 
8. Open your favorite audio recording, podcasting, or gaming software.  
9. Go to your software’s Settings and select Umpire USB Microphone as your 
audio input.  
 
macOS 
   
1. Use the integrated USB cable to connect the Umpire to your computer. 
2. Go to Applications > Utilities > Audio MIDI Setup. 
3. In  the  Audio  Devices  window,  select  Umpire  USB  Microphone  in  the  left 
column.  
4. Right-click Umpire USB Microphone, and select Use this device for sound 
input. 
5. Right-click Internal Speakers (Built-in output), and select Use this device 
for sound output. 
6. Quit Audio MIDI Setup. 
7. Open your favorite audio recording, podcasting, or gaming software.  
8. Go to your software’s Settings and select Umpire USB Microphone as your 
audio input.  
 
 
  
Español 
 
Contenido de la caja 
 
Micrófono 
Filtro anti-pop 
Soporte de micrófono 
Guia de inicio rapido 
Manual sobre la seguridad y garantía   
 
Configuración de micrófono 
 
1. Siga las  instrucciones  de configuración para su  sistema operativo en la  sección 
Configuración de audio. 
2. Utilice el cable USB-A incluido para conectar este dispositivo al puerto USB. 
3. Conecte los auriculares a la salida para auriculares de su dispositivo.  
4. Asegúrese  de  que  el  filtro  anti-pop  esté  sujetado  firmemente.  Coloque  el  filtro 
anti-pop cerca del micrófono, pero sin tocarlo. Incline el micrófono y el filtro anti-
pop a una posición de las 10 o 2 en punto para reducir los "pops". 
Nota: Para quitar el filtro, presione con delicadeza la insignia en la parte superior 
del  filtro  hasta  expulsarlo  del  marco  que  lo  mantiene  en  su lugar.  Para  volver  a 
colocar el filtro, encájelo a presión nuevamente en su lugar dentro del marco. 
5. (Opcional) Ajuste el interruptor de atenuación de 0 a -10 dB para disminuir la 
salida del micrófono si está grabando una fuente de volumen elevado.   
  
Configuración de audio 
 
Para configurar el Umpire como su dispositivo de grabación de audio predeterminado, 
siga estas instrucciones para su dispositivo/sistema operativo: 
 
Windows 
 
1. Utilice el cable USB incluido para conectar el Umpire a su ordenador. 
2. Localice  en  la  barra  de  tareas  el  icono  del  "altavoz"  del  control  de  volumen. 
Haga clic derecho en el altavoz y seleccione Playback Devices (Dispositivos de 
reproducción). Como alternativa, haga clic en Start Menu (menú Inicio) > Control 
Panel (Panel de control) (o Settings [Ajustes] > Control Panel en la Vista clásica) 
> > Hardware and Sound (Hardware y sonido)   Sound (Sonido). 
3. En  el  panel  de  control  Windows  Sound  (Sonido  de  Windows),  seleccione  la 
pestaña  Playback  (Reproducción)  y  seleccione  la  tarjeta  de  sonido  de  tu 
computadora como dispositivo predeterminado.  
4. Haga  clic  en  la  pestaña  Recording  (Grabación)  y  seleccione  la  Umpire  USB
Micrófono de como dispositivo predeterminado.   
5. Haga clic en Properties (Propiedades) en la esquina inferior derecha. En la nueva 
ventana, haga clic en la pestaña Advanced (Avanzadas) y seleccione 2-channel, 
24-bit,  48000  Hz  (Studio  Quality)  (2  canales,  24  bits,  48000  Hz,  calidad  de 
estudio) como formato predeterminado. 
Nota: Si  bien la interfaz de  dio  de hasta 24  bits, la audio del  Umpire soporta  au
salida del micrófono es de 16 bits solamente. 
6. Deshaga la selección de las dos casillas que están bajo Exclusive Mode (Modo 
exclusivo). 
7. Haga clic en OK (Aceptar) para cerrar la ventana de propiedades  y haga clic en 
OK (Aceptar) para cerrar el panel de control de sonido. 
8. Abra  su  software  de  grabación  de  audio,  transmisión  de  podcasts  o  juegos 
favorito.  
9. Abra los  ajustes  de su software  y  seleccione  Umpire USB  Micrófono  como su 
entrada de audio.  
  
macOS 
 
1. Utilice el cable USB incluido para conectar el Umpire a su ordenador.  
2. Vaya a Applications > Utilities > Audio MIDI Setup (Aplicaciones > Utilidades > 
Configuración MIDI de audio).   
3. En  la  ventana  Audio  Devices  (Dispositivos  de  audio),  seleccione  Umpire
 USB 
Micrófono en la columna izquierda. 
4. Haga clic derecho en Umpire USB Micrófono y seleccione Use this device for 
sound input (Utilizar este dispositivo para la entrada de sonido). 
5. Haga clic derecho en Altavoces internos (salida incorporada) y seleccione Use 
this device for sound output (Utilizar este dispositivo para la salida de sonido). 
6. Salga de la configuración MIDI de audio. 
7. Abra  su  software  de  grabación  de  audio,  transmisión  de  podcasts  o  juegos 
favorito.  
8. Abra  los ajustes de  su  software  y  seleccione Umpire  USB Micrófono como su 
entrada de audio.  
 
 
 
 
 
 
   
 
      
 
   
 
 
 
 
 
 
     
 
 
 
 
 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
 
   
 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
marantzpro.com/support 
 
For technical support. 
Para soporte técnico. 
Pour obtenir de l’assistance technique. 
Per assistenza tecnica. 
Für technischen Support. 
marantzpro.com 
 
For complete warranty information. 
Para información completa sobre la garantía. 
Pour obtenir toutes les informations relatives à la garantie. 
Per informazioni complete in merito alla garanzia. 
Für komplette Garantieinformationen. 
Quickstart Guide
Guia de inicio rapido 
Guide d'utilisation rapide 
Guida rapida 
Schnellstart-Anleitung 
 
 
 
Umpire