Smart Dive Computer
2
• TABLE OF CONTENTS
IMPORTANT WARNINGS 3
DISCLAIMER 3
1. INTRODUCTION 3
1.1. GLOSSARY 3
1.2. OPERATING MODES 4
1.3. USER-REPLACEABLE BATTERY 4
1.4. CONNECTING SMART TO A PC OR MAC 4
1.5. BUTTON OPERATION 4
1.6. WATCH DISPLAY 5
2. MENUS, SETTINGS AND FUNCTIONS 5
2.1. CHRONO 6
2.2. PRE DIVE 6
2.3. MODE 6
2.4. SET 6
2.4.1. SET DIVE 7
2.4.1.1. LIGHT (BACKLIGHT) 7
2.4.1.2. P FACT (P FACTOR) 7
2.4.1.3. ALT (ALTITUDE) 7
2.4.1.4. WATR (WATER) 7
2.4.1.5. UNITS 8
2.4.1.6. FAST (FAST ASCENT) 8
2.4.1.7. ALRM (ALARMS) 8
2.4.1.8. ERASE (ERASE DESATURATION) 8
2.4.2. SET TIME 8
2.5. LOG (LOGBOOK) 8
2.6. PLAN (DIVE PLANNER) 9
2.7. PC 9
2.8. INFO 9
3. DIVING WITH SMART 9
3.1. A FEW WORDS ABOUT NITROX 9
3.2. ALARMS 10
3.2.1. ASCENT RATE 10
3.2.2. MOD/PPO
2
10
3.2.3. CNS = 100% 10
3.2.4. MISSED DECOMPRESSION STOP 10
3.2.4.1. MISSED DECO STOP MODE 10
3.2.5. LOW BATTERY 11
3.3. DISPLAY INFORMATION 11
3.4. AFTER THE DIVE 12
3.5. DIVING WITH MORE THAN ONE GAS MIXTURE 12
3.5.1. SETTING MORE THAN ONE GAS 12
3.5.2. SWITCHING GAS 12
3.5.3. SPECIAL SITUATIONS 13
3.5.3.1. SWITCHING BACK TO A GAS MIXTURE WITH
LOWER OXYGEN CONCENTRATION 13
3.5.3.2. SUBMERGING BELOW THE MOD AFTER A GAS
SWITCH 13
3.6. BOTTOM TIMER MODE (BT) 13
3.6.1. DIVE VIOLATION INDUCED BOTTOM TIMER MODE 13
3.7. APNEA MODE 13
3.7.1. SETTINGS 13
3.7.2. USING SMART ON AN APNEA DIVE 14
3.7.2.1. SURFACING BETWEEN IMMERSIONS 14
3.7.3. LOGBOOK IN APNEA MODE 14
3.7.4. SWITCHING FROM APNEA TO SCUBA 14
4. TAKING CARE OF SMART 14
4.1. TECHNICAL INFORMATION 14
4.2. MAINTENANCE 15
4.2.1. REPLACING THE BATTERY IN SMART 15
4.3. WARRANTY 16
4.4. WARRANTY EXCLUSIONS 16
4.5. HOW TO FIND THE PRODUCT SERIAL NUMBER 16
5. DISPOSAL OF THE DEVICE 16
