Smart Air Dive Computer
2
• TABLE OF CONTENTS
IMPORTANT WARNINGS 3
DISCLAIMER 3
1. INTRODUCTION 3
1.1. GLOSSARY 3
1.2. OPERATING MODES 4
1.3. USER-REPLACEABLE BATTERY 4
1.4. CONNECTING SMART AIR TO A PC OR MAC 4
1.5. BUTTON OPERATION 4
1.6. WATCH DISPLAY 6
1.7. MOUNTING AND PAIRING OF THE TANK MODULE
(OPTIONAL) 6
2. MENUS, SETTINGS AND FUNCTIONS 7
2.1. CHRONO 7
2.2. PRE DIVE 7
2.3. MODE 7
2.4. SET 8
2.4.1. SET DIVE 9
2.4.1.1. LIGHT (BACKLIGHT) 9
2.4.1.2. P FACT (P FACTOR) 9
2.4.1.3. ALT (ALTITUDE) 9
2.4.1.4. WAtR (WATER) 9
2.4.1.5. GAS INTEGR (GAS INTEGRATION) 9
2.4.1.6. UNItS 10
2.4.1.7. FASt (FAST ASCENT) 10
2.4.1.8. ALAR (ALARMS) 10
2.4.1.9. ERASE (ERASE DESATURATION) 10
2.4.2. SET TIME 10
2.5. LOG (LOGBOOK) 10
2.6. PLAN (DIVE PLANNER) 11
2.7. PC 11
2.8. INFO 11
3. DIVING WITH SMART AIR 11
3.1. A FEW WORDS ABOUT NITROX 11
3.2. ALARMS 12
3.2.1. ASCENT RATE 12
3.2.2. MOD/PPO
2
12
3.2.3. CNS = 100% 12
3.2.4. MISSED DECOMPRESSION STOP 12
3.2.4.1. MISSED DECO STOP MODE 13
3.2.5. LOW TANK PRESSURE
(IF OPTIONAL TANK MODULE IS USED) 13
3.2.6. LOW BATTERY 13
3.3. DISPLAY INFORMATION 13
3.4. AFTER THE DIVE 14
3.5. DIVING WITH MORE THAN ONE GAS MIXTURE 15
3.5.1. SETTING MORE THAN ONE GAS 15
3.5.2. SWITCHING GAS 15
3.5.3. SPECIAL SITUATIONS 16
3.5.3.1. SWITCHING BACK TO A GAS MIXTURE WITH
LOWER OXYGEN CONCENTRATION 16
3.5.3.2. SUBMERGING BELOW THE MOD AFTER A GAS
SWITCH 16
3.6. BOTTOM TIMER MODE (BT) 16
3.6.1. DIVE VIOLATION INDUCED BOTTOM TIMER MODE 16
3.7. APNEA MODE 16
3.7.1. SETTINGS 16
3.7.2. USING SMART AIR ON AN APNEA DIVE 17
3.7.2.1. SURFACING BETWEEN IMMERSIONS 17
3.7.3. LOGBOOK IN APNEA MODE 17
3.7.4. SWITCHING FROM APNEA TO SCUBA 18
4. TAKING CARE OF SMART AIR 18
4.1. TECHNICAL INFORMATION 18
4.2. MAINTENANCE 18
4.2.1. REPLACING THE BATTERY IN SMART AIR 18
4.3. WARRANTY 19
4.4. WARRANTY EXCLUSIONS 19
4.5. HOW TO FIND THE PRODUCT SERIAL NUMBER 19
5. DISPOSAL OF THE DEVICE 19
