Markbass MB7 Distorsore Manual

Markbass Ikke kategoriseret MB7 Distorsore

Læs gratis den danske manual til Markbass MB7 Distorsore (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Markbass MB7 Distorsore, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

LIMITED WARRANTY

Markbass oers an international limited warranty on Markbass products purchased from any

authorized Markbass dealer, eective from the day of purchase. The terms of this warranty

vary from country to country; please contact the Markbass distributor in your country for

details.

Please register this product online at www.markbass.it to establish the date of purchase.

However, please note that you are required to retain a copy of your receipt as proof of

purchase in order to receive warranty service.

This warranty does not apply to any damage to the product caused by misuse, mishandling,

accident, abuse, alteration, modication or unauthorized repairs. Product appearance and

normal wear and tear (worn paint, scratches, etc.) are not covered by this warranty. Markbass

reserves the right to be the sole arbiter regarding the misuse or abuse of this product.

Markbass assumes no liability for any incidental or consequential damages, which may result

from the failure of this product. Any warranties implied in fact or by law are limited to the

duration of this express limited warranty. Your legal rights related to the warranty will vary

depending on the country of purchase.

WARRANTY CARD

This product is guaranteed by the warranty provided in the country of purchase, under the

following conditions:

A - The Markbass warranty is only applicable if this document been properly completed (here

or online) and if the original invoice/bill of sale, mentioning model, serial number and

purchase date, is presented together with this document.

B - The obligations of Markbass are limited to the repair of defects. Warranty repair eligibility

will be decided at the sole discretion of Markbass or its representatives. Freight, freight

insurance costs, and any other costs related to the repair of this product are not covered by

this warranty.

C - All warranty repairs must be made by Markbass or an authorized Markbass (PARSEK)

service center.

D - This warranty does not apply in the following instances:

• if the damage was caused by accident, negligence or modications; use of non Markbass

spare parts; or improper use, installation or packing;

• if the serial number on the equipment is illegible;

• if the damage was caused by lightning, water, re, incorrect main voltage, insuﬃcient

ventilation or any other cause beyond the control of Markbass.

E - Markbass reserves the right to redesign or improve/modify its product at any time without

any obligation to modify previously manufactured products.

Parsek srl. - Italy - 66020 San Giovanni Teatino (Ch) - Via Po, 52/A Tel. +39 085 446 37 55 - Fax

+39 085 440 77 64 - www.markbass.it - info@markbass.it

TECHNICAL SPECS

INPUT IMPEDANCE:

1.5 Mohm / 6 Vpp

OUTPUT IMPEDANCE:

100 ohm / 6 Vpp

DRIVE:

+50dB (maximum gain)

LEVEL OUTPUT: 0 to Max

GRAPHIC EQ: Freq. (Hz): 40, 80, 250, 400, 1200, 2000, 4000

Level: (-16dB, +16dB)

POWER REQUIREMENTS- DC INPUT: +9/+12VDC or standard 9-volt battery

DIMENSIONS:

98.8 x 38.3 x 124.2 mm / 3.89” x 1.51” x 4.89”

WEIGHT:

405 g / 0.89 lbs

BLOCK DIAGRAM

OWNER’S MANUAL

distortion

Drive Level

Out

equalizer

40 80250

400

1.2K

2K 4K

WARRANTY CARD

We’d like to thank you for choosing a Markbass product.

If any problem occurs, please don’t hesitate to contact our support team at

service@markbass.it.

You can ll out this form and send a copy to Markbass (Parsek srl, Via Po 52, 66020 San Giovanni

Teatino, CHIETI ITALY) or, even better, you can now register your warranty online in a matter of

minutes, using our online registration form at www.markbass.it. Simply point, click and type in

your information...and you’re done!

Registering your warranty identies you and your product, in case you are ever in need of

warranty service. Please note that in order to qualify for warranty service, you must retain a

copy of the sales receipt or bill of delivery as proof of purchase.

The information that you provide here will not be shared with any third parties and will be used

for Markbass internal business purposes only.

PRODUCT INFORMATION

Model _________________________________ Serial Number _________________________

Date of Purchase_________________________(mm/dd/yyyy)

DEALER INFORMATION

Dealer _________________________________ Dealer City ____________________________

Dealer Country__________________________

PERSONAL INFORMATION

Purchased by:

First Name _____________________________ Last Name ____________________________

Your Email Address ______________________ Address ______________________________

City ___________________________________ State/Prov ____________________________

Zip ___________________________________ Country______________________________

Do you want to join our mailing list? YES NO □ □

MORE INFO (* not mandatory)

*Age __________________________________ *Sex_________________________________

*Occupation____________________________

WHERE DO YOU PLAY YOUR INSTRUMENT?

□ □ Stage / Performing Musician School / Student

□ □ □ Classroom / Educator Home Studio Recording

WHAT LEVEL OF PLAYER ARE YOU?

□ □ □ Beginner Amateur Semi-Professional

□ Professional

PRODUCT PURCHASED VIA:

□ □ Internet Retail Store

WHAT MOST INFLUENCED YOUR BUYING DECISION?

______________________________________________________________________________

1. IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions;

2) Keep these instructions;

3) Heed all warnings;

4) Follow all instructions;

5) Do not use this apparatus near water;

6) Clean only with dry cloth;

7) Install in accordance with the manufacturer’s instructions;

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatuses (including ampliers) that

produce heat;

9) Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where

they exit from the apparatus;

10) Only use attachments/accessories specied by the manufacturer;

11) Unplug this apparatus during lightning storms or when unused for long periods of time;

12) Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way,

such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen

into the apparatus, or when the apparatus has been exposed to rain or moisture, does not operate normally, or has been

dropped;

13) “Warning: to reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture; and objects lled with

liquids, such as vases, should not be placed on this apparatus”;

14) The socket outlet shall be installed near the equipment and shall be easily accessible;

15) The power cord must be unplugged prior to servicing.

1. PRÉCAUTIONS D’EMPLOI

1) Lire ces instructions;

2) Conserver ces instructions;

3) Suivre tous les conseils d’utilisations;

4) Suivre toutes les instructions;

5) Ne pas utiliser cet appareil au bord de l’eau;

6) Nettoyer uniquement avec un chion humide;

7) Ne pas bloquer le système de ventilation. Installer conformément aux instructions du fabricant;

8) Ne pas installer l’appareil près d’une source de chaleur tel qu’un radiateur, un fourneau, ou bien un autre appareil qui produit

de la chaleur;

9) Protéger le cordon d’alimentation an qu’il ne soit pas piétiné ou écrasé tout particulièrement au niveau des ches, des prises

de courant femelles, et des parties qui sortent de l’appareil;

10) Utiliser uniquement les accessoires recommendés par le fabricant;

11) Ne pas branché l’appareil en cas d’orage accompagné d’éclairs. Le débrancher en cas de non utilisation prolongée;

12) S’adresser à un service assistance agréé si l’appareil a subi des dommages, si le cordon d’alimentation ou la che a été

endommagé, si un liquide a été renversé sur l’appareil ou bien si un object est tombé dans l’appareil,

si ce dernier a été exposé à la pluie ou à l’humidité, s’il ne fonctionne pas correctement ou s’il est tombé;

13) “Avertissant: pour réduire le risque du feu ou de décharge électrique, n’exposez pas cet appareil à la pluie ou l’humidité et les

objets remplis de liquides; tels que des vases, ne devraient pas être placés sur cet appareil”;

14) La prise de courant doit être installée près de l’appareil et doit être facilement accessible;

15) La che principale doit être débranchée avant toute opération d’entretien.

MORE INFORMATION

For warranty and service information, please contact your local Markbass distributor (contact information available at

www.markbass.it). For more technical information, please visit us at www.markbass.it and ll out the form on the

“The Lightning Flash with arrowhead symbol

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product

enclosure that may be of suﬃcient magnitude

to constitute a risk of shock to persons.”

“The exclamation point within an equilateral

triangle is intended to alert the user

to the presence of important operating and

maintenance (servicing) instructions

in the literature accompanying the product.”

FUNCTIONS OVERVIEW

DRIVE (1) – adjusts the amount of distortion.

LEVEL (2) - controls the overall eect volume, so you can match the distortion level

to the clean volume when switching the eect on and o. Alternatively, you can set

this to provide a volume boost when you activate the distortion.

7-BAND GRAPHIC EQ (3) – This lets you modify the tone of your distortion sound,

giving you options ranging from subtle to extreme. The 7 frequency bands were

specically chosen because they are the most

used for tailoring bass tone.

ON/OFF SWITCH* (4) – Turns the eect on and

o; the LEDs on the sliders illuminate when the

eect is on.

*TRUE BYPASS

TRUE BYPASS - When the pedal’s controls are ‘o’,

your signal goes directly from the input jack to the

output jack without any degradation of audio

quality.

CONNECTIONS

1/4” INPUT JACK (connects to your instru-

ment ) (5) - Make sure that your amp is o and

the volume is turned down before making

connections. Connect your instrument to the input of the MB7 Distorsore and the

output of the MB7 Distorsore to your amplier.

1/4” OUTPUT JACK (connects to your amplier ) (6)

DC IN (7) - External power supply connection: +9/+12VDC

STANDARD 9V BATTERY COMPARTMENT (8) - Use a Phillips screwdriver to

unscrew the two screws to access the 9V battery compartment on the bottom side

of the pedal.

Produkt Specifikationer

Mærke:	Markbass
Kategori:	Ikke kategoriseret
Model:	MB7 Distorsore

Har du brug for hjælp?

Hvis du har brug for hjælp til Markbass MB7 Distorsore stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Markbass Manualer

Markbass Little Mark IV Manual

21 August 2024

Markbass Little Mark IV Ninja Manual

20 August 2024

Markbass Little Mark IV 300 Manual

19 August 2024

Markbass Compressore Manual

18 August 2024

Markbass Super Synth Manual

18 August 2024

Markbass MB Mini Boost Manual

17 August 2024

Markbass MB Octaver Manual

16 August 2024

Markbass Bass Tube Marker Manual

16 August 2024

Markbass MB7 Distorsore Manual

16 August 2024

Markbass Little Mark 58R Manual

16 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Essentiel B SP40 Manual

18 Juni 2025

Royal Catering RCGW 1 Manual

18 Juni 2025

Tracer GameZone Hexy2 Manual

18 Juni 2025

Chapin 97084 Manual

18 Juni 2025

Royal Catering RCSW-3R Manual

18 Juni 2025

Festo EMMB-AS-60-02-K-S30M Manual

18 Juni 2025

Royal Catering RC-FST635G Manual

18 Juni 2025

Smeg KBSF02WH Manual

18 Juni 2025

Steinberg SBS-FZ 1000/6M Manual

18 Juni 2025

Royal Catering RCGW-2 Manual

18 Juni 2025