1
Understanding Quick setup of CV730-BHN
with NDI®
This section explains how to quickly congure the Marshall CV730-BHN camera with NDI ®.
It also explains how to update the device, and where you can nd additional NDI software to extend your
workow. Complete NDI® Tools can be found here: https://www.ndi.tv/tools/
Here you will choose whether you will require NDI® Tools for Windows or Mac and download. After completing
this short section, you will be all set to begin using your new NDI®|HX camera.
OVERVIEW: Unlike typical cameras, CV730-BHN leverages the easy plug-n-play benets of the NDI-based IP
workow supported by leading video software and hardware developers around the globe.
GETTING READY: Your new CV730-BHN has full-NDI® (High Bandwidth) and NDI|HX3 protocols for audio/
video transmission, and more. Your rst step will be to install NDI® drivers if using a TriCaster, or Microsoft
HEVC decode on non-TriCaster systems, as appropriate for your computer platform or device.
1. Navigate to ndi.tv/formats in your web browser and follow the relevant directions to download and install
the drivers for your computer platform.
2. NDI Studio Monitor and other useful NDI|TOOLS can be found here: https://www.ndi.tv/tools/
3. Then simply plug the Ethernet (NDI) port to same Network your computer or Newtek equipment are
plugged into and o you go.
4. The NDI driver also installs NewTek’s NDI Studio Monitor application, which will display the output of your
camera and provide easy access to its settings.
5. Also contains built-in PTZ controls.
PLEASE NOTE: The End User License Agreement under which you use the NDI® driver species that “you
may use up to ve (5), and no more than ve, copies on separate machines at one time.”
OPTIONAL – for Microsoft Windows® users, downloading and installing the NewTek NDI® Tools pack, available
at no cost from ndi.tv/tools/, the download pack will provide learning tools and utilities to maximize your NDI®
experience.
FINAL NOTE – if you are experiencing any problems with the NDI® platform, NDI® software, NDI® drivers
please contact Newtek for technical assistance or join the NDI community to review HOW-TO videos, social
media, forums, blogs: www.ndi.tv/community
If you are having a hardware problem, and need assistance please contact Marshall Electronics.
Marshall Customer Support
Toll Free: 800-800-6608 or 310-333-0606
email: support@marshall-usa.com
