Martin Thrill Compact Par Mini LED Manual

Martin Lys Thrill Compact Par Mini LED

Læs gratis den danske manual til Martin Thrill Compact Par Mini LED (2 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Martin Thrill Compact Par Mini LED, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

THRILL Compact PAR Mini LED

User Guide

WARNING!

Read the Safety and Installation Guide supplied

with this product before installing or using this

product.

Fixture overview

Multi-function bracket

DMX Out

LED emitters

AC Mains in

Hand wheel

Secondary attachment

point

IR receiver

control panel

DMX IN

AC Mains out

Microphone

Clamp attachment point

Using the control menu

The control menu is shown below. To

access the menu, press the MENU

button. Scroll through options with the ▼

(down) and (up) buttons. Press ENTER to select an option. ▲

To return to a higher level in the menu, press MENU. To exit the

menu, press and hold MENU or wait a few seconds.

The default menu settings are shown in . bold

Sub-menu

Explanation







Set DMX address



 





Select 3-channel DMX mode



Select 6-channel DMX mode







Set Slave ﬁxtures





Set Master ﬁxtures



 -







Show selection oﬀ





Select preprogrammed show.















Select auto-trigger speed from

1-8







Toggle sound activation on/oﬀ





Set microphone sensitivity







Black out if DMX lost



Run stand-alone show



Hold last values if no DMX







-

Toggle display on/oﬀ





Inverted/normal display





Manual mode, select eﬀect

and set level from 0 to 255.















Run ﬁxture test routine





Readout ﬁxture hours





Readout ﬁrmware version





Reset to default values

DMX mode operation and settings

DMX channel mode ( )





The Compact PAR Mini LED has 2 DMX modes that use 3 or 6

channels. The 3 channel mode provides color mixing with 0-

100% control of each color; red, green, blue.

In 6-channel mode, the Compact PAR Mini LED provides

color mixing, 36 popular preset colors, full-range dimming, and

strobe eﬀects. The DMX command tables list all functions and

their values.

To set 3 channel or 6 channel DMX mode:

Press MENU to enter the control menu.

Scroll to . Press ENTER to confirm.

Scroll to the desired mode:  or .

Press ENTER to save your selection.

DMX address ( )





A DMX controller uses either 3 or 6 DMX channels to control the

Compact PAR Mini LED. The DMX address is the ﬁrst channel

used. If ﬁxtures are set to 6 channel DMX mode and the ﬁrst

fixture’s DMX address is set to 1, then it receives instructions on

DMX channels 1, 2, 3, 4, 5, and 6. The next ﬁxture could then

be set to a DMX address of 7.

For independent control, each ﬁxture must have its own unique

control channels. For symmetric control, identical ﬁxtures can be

set to the same DMX address.

Assign an address for the fixture on the DMX controller. Then set

that address on the Compact PAR Mini LED as follows:

1. Press MENU to enter the control menu.

2. Scroll to . Press ENTER. 

3. Scroll to the address that you assigned to the fixture.

Press ENTER to save the address .

DMX state ( )





The ﬁxture runs in DMX mode whenever it receives DMX

signals. When there is no DMX signal, the ﬁxture can be set to

run in Show Mode ( ), black out ( ), or hold the last  

DMX values received ( ).  For Show Mode operation, DMX

state must be set to 



.

To select behavior when there is no DMX signal:

Select  in the control menu and press ENTER.

Select the desired behavior: , , or .

Press ENTER to save your selection.

DMX commands, 3 Channel Mode

Ch.

Value

Function

DMX commands, 6 Channel Mode

Ch.

Value

Function

0-7

8- 15

16 131-

132 139-

140 181-

182 189-

190 231-

232 239-

240 247-

248 255-

Shutter

Closed

Open

Strobe, slow to fast

Open

Pulse, fast close/slow open

Open

Pulse, slow close/fast open

Open

Random strobe

Open

0- 255

Dimmer, intensity 0-100%

0- 255

Red, intensity 0-100%

0- 255

Green, intensity 0-100%

0- 255

Blue, intensity 0-100%

0- 10

11 15-

16 20-

21 25-

26 30-

31 35-

36 40-

41 45-

46 50-

51 55-

56 60-

61 65-

66-70

71 75-

76 80-

81 85-

86 90-

91 95-

96-100

Color presets

Oﬀ

Color 1

Color 2

Color 3

Color 4

Color 5

Color 6

Color 7

Color 8

Color 9

Color 10

Color 11

Color 12

Color 13

Color 14

Color 15

Color 16

Color 17

Color 18

Ch.

Value

Function

101-105

106-110

111-115

116-120

121-125

126-130

131-135

136-140

141-145

146-150

151-155

156-160

161-165

166-170

171-175

176-180

181-185

186-190

191-192

193-214

215-221

222-243

244-247

248-251

252-255

Color 19

Color 20

Color 21

Color 22

Color 23

Color 24

Color 25

Color 26

Color 27

Color 28

Color 29

Color 30

Color 31

Color 32

Color 33

Color 34

Color 35

Color 36

Oﬀ (no preset color)

Continuous color scroll,

fast to slow

Color scroll stop

Reverse color scroll,

slow to fast

Random colors, fast

Random colors, medium

Random colors, slow

Show mode operation and settings

Show mode lets you run a standalone light show without a DMX

controller Shows can be triggered by sound, or automatically .

triggered at eight speeds.

To enable Show Mode operation, set the DMX state setting



.

Show selection ( )





Four shows are available. select a preprogrammed show: To

Press MENU to enter the control menu.

1. Scroll to and press ENTER. 

2. Select and press ENTER. 

3. Select a show from to , or select to disable   

Show Mode. Press ENTER.

Music trigger ( )



 









The fixture’s built-in microphone triggers eﬀect and color

changes in sync with music. To enable sound activation:

1. Select  in the control menu and press ENTER.

2. Select  to enable sound activation or  to disable it.

3. Press ENTER to save your selection.

To adjust microphone sensitivity for the volume of the music:

1. Turn on the music source and set it to the desired volume.

2. Select in the control menu and press ENTER. 

3. Press or to decrease or increase the sensitivity level. ▼ ▲

4. When the ﬁxture responds as desired, press ENTER.

Auto trigger speed ( )





To use auto trigger in Show Mode:

1. Turn oﬀ sound activation as described above.

2. Select  in the control menu and press ENTER.

3. Scroll to . Press ENTER.

4. Select a trigger speed from 1 (slow) to 8 (fast). Press

ENTER.

Master/slave mode operation and settings

Up to 32 Compact PAR Mini LEDs can be linked in a chain and

set to master/slave operation, where the first Compact PAR Mini

LED controls in the chain is set to operate as the “master” that

the others. This provides synchronized operation without a

controller .

0- 255

Red 0-100%

0- 255

Green 0- 100%

0- 255

Blue 0-100%

Note: There must be no more than one master in the chain.

Set all other connected ﬁxtures to operate as slaves.

To set the ﬁrst ﬁxture to be the master:

1. Enter the control menu and scroll to . Press ENTER.

2. Scroll to . Press ENTER.

3. Set show mode options as described above.

To set other fixtures as slaves:

1. Enter the control menu and scroll to . Press ENTER.

2. Scroll to . Press ENTER.

Link the master and slave ﬁxtures in a chain, using DMX cable to

connect each fixture’s DMX OUT socket to the next fixture’s DMX

IN socket as described in the Safety and Installation Guide.

Other settings

LED display on/oﬀ (







)

To set the control panel’s LED display to be on all the time, or to

automatically sleep when not in use:

1. Select  in the control menu and press ENTER.

2. Select  and press ENTER.

3. Select  (display on) or  (display oﬀ when not in use).

4. Press ENTER to save your selection.

LED display inversion ( )





To invert the control panel’s LED display for easier reading:

1. Select  in the control menu and press ENTER.

2. Select  and press ENTER.

3. Select to invert the display.

4. Press ENTER to save your selection or MENU to escape.

Manual mode ( )





Eﬀects can be set from the control panel. To keep the eﬀect

settings, do not exit the menu.

See the 6-channel mode DMX table for command values. To set

eﬀects from the control panel:

1. Enter the control menu and scroll to . Press ENTER.

2. Scroll to the color or effect to adjust. Press ENTER.

3. Press or ▼ ▲ to specify a value from 0 to 255 for the effect.

4. Press ENTER to set the eﬀect.

5. Press MENU and repeat for the other colors or eﬀects.

Auto test ( )





To test all of the fixture functions select and press ENTER. 

Press MENU to exit the test routine.

Fixture readouts

Hours: select To display the fixture’s total operating hours 

and press ENTER. Press MENU to exit.

Firmware: To display the ﬁrmware version number,

select and press ENTER. Press MENU to exit. 

Settings reset

To return all user settings to the factory default values, select

 in the control menu. Press ENTER to conﬁrm or MENU to

escape.

Remote control operation

The remote control works with all Compact PAR Mini LED

ﬁxtures within range.

To operate the Compact PAR Mini LED with the remote control:

Verify that the ﬁxture is not connected to a DMX controller.

Press MENU to enter the control menu.

1. Scroll to and press ENTER. 

2. Select and press ENTER. 

3. Select to disable Show Mode. Press ENTER  .

4. To execute commands, point the remote control towards the

front of the fixture and the press corresponding button. See

table below.

Remote Control Commands

Replacing the wireless remote control battery

The wireless remote control uses a single CR 2025

coin/button/cell 3 V lithium battery. To replace the battery:

1. Depress the battery tray lock on the reverse of the remote

control and slide out the battery tray. Remove the old

battery .

2. Insert a fresh battery with the positive terminal towards the

back of the remote. A diagram on the remote control

indicates the correct orientation.

3. Align the battery tray to the remote control and re-insert the

tray ensuring that the locking mechanism is secure.

4. Dispose of used batteries in accordance with local

regulations.

If the coin/button/cell battery compartment does not close

securely, stop using the product and keep it away from children

and animals. Contact Martin Professional for Service and

Support.

Troubleshooting

Symptom

Potential Causes

Remedies

No light from

ﬁxture, control

panel dead

Power supply issue

such as blown fuse,

faulty connector or

damaged cable

Ensure that the mains

supply is connected

and supplying power to

the ﬁxture

Check all power

connections and

cables

Check and if

necessary replace the

fuse

Fixture does not

respond to DMX

control

Fault in the DMX

network due to

connector or cable

damage, incorrect

DMX addressing, or

signal interference

Ensure that fixture’s

DMX address matches

address set on DMX

control device

Check DMX cables

and connections

Ensure that DMX link

is terminated

Reduce number of

ﬁxtures on DMX link

Attempt to control the

ﬁxture with another

DMX control device

Move or shield link if it

is close to unshielded

high-voltage cables

Fixture does not

respond in Show

Mode

Fixture set to run as

slave

Change master/slave

setting master

Sound trigger

disabled

Enable sound trigger

Show Mode disabled

or no show selected

Change DMX state

setting to Show Mode

Select a show

Microphone

sensitivity too low

Increase sensitivity



Fixtures don’t

respond in

master/slave

mode

Fixture receiving

multiple control

signals

Disconnect or turn oﬀ

DMX controller

Verify there is only one

ﬁxture master ﬁxture

No master ﬁxture

Set ﬁrst ﬁxture in chain

as master

Fixture does not

respond to remote

control

Remote control out

of range

Move closer to ﬁxture

Battery exhausted

Replace battery

Incorrect menu

settings

Verify show mode is

disabled ( -  = )

Button

Function

Toggle LEDs on/oﬀ

Adjust speed (4 levels). Use with JU, FA, and SU.

Dimming (4 levels)

Strobe (4 speeds)

Adjust Red intensity (oﬀ, 4 levels)

Adjust Green intensity (oﬀ, 4 levels)

Adjust Blue intensity (oﬀ, 4 levels)

no function

Jump Mode – snaps thru pre-programmed colors. Adjust

speed with SP.

Fade Mode fades thru pre-programmed colors. Adjust –

speed with SP.

Auto-trigger mode.

Music-triggered Sound Mode. Adjust sensitivity level with

SP.

CM+

Next color

CM-

Previous color

Information subject to change without notice. HARMAN

Professional Denmark ApS disclaims liability for any injury,

damage, direct or indirect loss, consequential or economic loss

or any other loss occasioned by the use of, inability to use or

reliance on the information contained in this document.

reserved. Martin® is a registered trademark of HARMAN

Professional Denmark ApS registered in the United States and/or

other countries. Features, speciﬁc-ations, and appearance are

subject to change without notice.

HARMAN Professional Denmark ApS

Olof Palmes Allé 18 • 8200 Aarhus N • Denmark

www.martin.com

Document revision: A

IN INOUT OUT IN OUT IN OUT

Produkt Specifikationer

Mærke:	Martin
Kategori:	Lys
Model:	Thrill Compact Par Mini LED
Kode for international beskyttelse (IP):	IP20
Bredde:	115 mm
Dybde:	229 mm
Højde:	229 mm
Vægt:	1300 g
Produktfarve:	Sort
Kontroltype:	Knapper
Lampe type:	LED
Indbygget skærm:	Ja
Skærmtype:	LED
Produkttype:	Disco laserprojektor & stroboscope
Ledningslængde:	1.5 m
Strømforbrug (typisk):	25 W
Antal:	1
Fjernbetjening inkluderet:	Ja
Strømkilde:	Vekselstrøm
AC-adapter inkluderet:	Ja
Pæreeffekt:	3 W
Antal lamper:	7 Lampe( r)
Lysfarve:	Blue,Green,Red
Indgangsspænding:	100 - 240 V
Strålevinkel:	25 °
Pære levetid:	30000 t
Indgangsfrekvens:	50/60 Hz
Monteringssæt:	Ja
Velegnet til indendørsbrug:	Ja
Fjernbetjeningstype:	IR
Lysdæmper:	Ja
Belysningstilstande:	DMX,Master/slave,Sound activated,Stand-alone
Antal DMX kanaler:	6 kanaler
Antal minimum DMX kanaler:	3 kanaler
Fjernbetjening funktion:	Ja
Antal stifter:	3
Bold diameter:	- "
XLR indgang:	Ja
Impulsfunktion:	Ja
DMX indgang:	Ja
Egnet til udendørs brug:	Ingen
Omgivelsestemperatur (maks):	40 °C