Mastercraft MD17E-MAS Manual

Mastercraft Gulvpoleringsmaskine MD17E-MAS

Læs gratis den danske manual til Mastercraft MD17E-MAS (8 sider) i kategorien Gulvpoleringsmaskine. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Mastercraft MD17E-MAS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Page 1

Part No 238066 - Printed in USA 06/16/08

This floor sander will afford you many

years of trouble-free operating satisfac-

tion, provided it is given proper care.All

parts have passed rigid quality control

standards prior to being assembled to

produce the finished product. Prior to

packaging, the vacuum was again

inspected for assurance of flawless

assembly.

Your floor sander is protectively

packed to prevent damage in ship-

ping. We recommend that upon deliv-

ery, unpack the sander and inspect it

for any possible damage. Only a visu-

al examination will reveal damage

that may have occurred.

If damage is discovered, immediately

notify the transportation company that

delivered your sander. As a shipper,we

are unable to report claims for con-

cealed damage. You must originate

any claims within 5 days.

This manual is for your protection and

information. PLEASE READ CAREFULLY

since failure to follow precautions

could result in discomfort or injury.

Treat this floor sander as you would

any other high grade precision made

product. Dropping, unreasonable

bumping across thresholds and other

misuses may result in a damaged unit

which is not be covered by warranty.

Read and Follow All Instructions,

Warnings & Cautions Before Using This Machine

Address: 777 South Street

P.O. Box 2310

Newburgh, NY 12550-0606

TEL:

(800) 835-7812 (845) 565-8850

FAX:

(800) 752-6883 (845) 565-9392

mastercraftusa.com

techsupport@mastercraftusa.com

MD17E-MAS-AR

AFETY, OPERATION

& MAINTENANCE

MANUAL

W/PARTS ISTL

This unit is intended for commercial use.

AVE THESE INSTRUCTIONS

RISK OF EXPLOSION

FLOOR SANDING CAN RESULT IN AN EXPLOSIVE MIXTURE OF FINE DUST AND

AIR. USE FLOOR SANDER MACHINE ONLY IN A WELL VENTILATED AREA.

To reduce risk of fire, electric shock or injury;

Read all instructions before using this floor sander.

WARNING:

1) DO NOT leave this floor sander

plugged in when not in use. Unplug

from outlet when not in use and/or

before servicing.

2) Electric shock could occur if

exposed to rain. Store indoors.

3) This is NOT a toy. Close attention is

necessary when used around or near

children.

4) Use only as described in this manu-

al. Use only manufacturer's recom-

mended attachments.

5) DO NOT use with damaged cord

plug. If the floor sander is not working

as it should because it has been

dropped, damaged, left outdoors, or

dropped into water,contact the manu-

facturer or authorized service center.

6) DO NOT handle the plug or operate

with wet hands.

9) DO NOT unplug by pulling on cord.

To unplug, grasp the plug, not the

power cord.

7) DO NOT pull or carry by cord, use

power cord as a handle, close a door

on cord, or pull cord around sharp

edges or corners. DO NOT run the floor

sander over the cord. Keep cord away

from heated surfaces.

8) DO NOT put any object into motor

openings.

10) Keep hair, loose clothing, fingers

and all parts of body away from mov-

ing parts.

11) DO NOT operate where oxygen or

anesthetics are used.

12) DO NOT use around flammable or

combustible liquids such as gasoline

or use in areas where they may be

present.

13) DO NOT use an extension cord

unless absolutely necessary. If an

extension cord is used, then wire size

must be #14 gauge or thicker and

should not exceed 50 feet in length.

Use only a three-wire grounded exten-

sion cord to ensure grounding protec-

tion.

14) Replace damaged or worn parts

immediately with genuine original

equipment parts to maintain safety

and to protect your limited warranty.

15) Floor sanding can result in an

explosive mixture of fine dust and air.

Use a floor sanding machine only in a

well ventilated area and with the vac-

uum cleaner hooked up and operat-

ing.

Page 2

When using this electric floor sander, basic precautions should always be followed, including the following:

Electrical equipment must be ground-

ed. If it should malfunction or break-

down, grounding provides a path of

least resistance for electrical current to

reduce the risk of electric shock. This

floor sander is equipped with a cord

having an equipment-grounding con-

ductor and grounding plug. The plug

must be inserted into an appropriate

outlet that is properly installed and

grounded in accordance with all local

codes and ordinances.

If repair or replacement of the cord or

plug is necessary, DO NOT connect

the grounded wire to either flat blade

terminal. The wire with insulation hav-

ing an outer surface that is green with

or without yellow stripes is the ground-

ing wire.

Improper use of the grounding plug can result in

a risk of electric shock.

D :ANGER

Improper connection of the equipment-grounding conductor can result in a risk of electric shock.

Check with a qualified electrician or service person if you are in doubt as to whether

the outlet is properly grounded.

DO NOT modify the plug provided with the equipment. If it will not fit the outlet,

have a proper outlet installed by a qualified electrician.

WARNING:

IMPORTANT

SAFETY

INSTRUCTIONS

GROUNDING

INSTRUCTIONS

Produkt Specifikationer

Mærke:	Mastercraft
Kategori:	Gulvpoleringsmaskine
Model:	MD17E-MAS

Har du brug for hjælp?

Hvis du har brug for hjælp til Mastercraft MD17E-MAS stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Gulvpoleringsmaskine Mastercraft Manualer

Mastercraft MD17E-MAS Manual

25 August 2025

Mastercraft MD17E-DSOBV Manual

25 August 2025

Gulvpoleringsmaskine Manualer

Nyeste Gulvpoleringsmaskine Manualer

Advance SC351 Manual

26 August 2025

Tornado 99406 Manual

25 August 2025

Powr-Flite Predator PAS20E Manual

25 August 2025

Advance SC901 Manual

25 August 2025

Advance SC500 Manual

25 August 2025

Advance Adfinity X20C Manual

25 August 2025

Advance SC100 Manual

25 August 2025

Advance SC4000 Manual

25 August 2025

Advance SC450 Manual

25 August 2025

Advance SC800 Manual

25 August 2025