Maverick Digital Chef Manual

Maverick Madtermometer Digital Chef

Læs gratis den danske manual til Maverick Digital Chef (2 sider) i kategorien Madtermometer. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Maverick Digital Chef, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
INSTRUCTION MANUAL
MODEL # HD-8 DIGITAL ALERT
ROASTING THERMOMETER
Introduction
Congratulations on your purchase of the Digital Alert Roasting Thermometer, a
programmable food thermometer.
Unit Features
LCD (Liquid Crystal Display) – Displays all icons, temperature and timer.
The LCD color coded screen will change colors as per the following:
Blue – Will flash blue when the temperature has risen 10°F from the lowest
temperature.
Green – Will flash green then the temperature is within 15 ° F of the set
temperature.
Red- Will flash red when the temperature reaches the set temperature.
The LCD will display temperatures from 16- 482 ° °F. (-9-250 C)
See LCD diagram for detailed information.
BATTERY COMPARTMENT – Holds 2 AAA batteries (Batteries are included).
Buttons
1. MODE – Press to select thermometer or timer mode.
2. HR – In timer mode, press to set hour. Press & hold for 2 seconds, the hours will
increase 10 hours per second. In thermometer mode, press to increase the temperature
value. Press & hold for 2 seconds, the temperature value will increase 10 degrees per
second.
3. °F/°C – In thermometer mode press to select temperature readings in Celsius or
Fahrenheit.
4. MIN – In timer mode, press to set minutes. Press & hold for 2 seconds, the minutes will
increase 10 minutes per second. In thermometer mode, press to decrease the temperature
value. Press & hold for 2 seconds, the temperature value will decrease 10 degrees per
second.
5. MEAT – In thermometer mode, press to select meat type, PROG (program), GBEEF
(ground beef), GPOUL (ground poultry) , BEEF, VEAL, CHCKE (chicken), PORK, POULT
(poultry) , LAMB & FISH. In Timer mode switches between hour/minute timer to a
minute/second timer and back.
6. START/STOP– In timer mode, press to start or stop the timer.
7. TASTE – In thermometer mode, select the meat taste level, RARE, MED RARE,
MEDIUM, MED WELL and WELL DONE.
LCD Diagram
Measure meat temperature to USDA doneness temperature range
1. Press MODE to select thermometer mode. The upper display will show a small MEAT
and a meat type such as BEEF.
2. Press MEAT to select meat type. PROG (program), GBEEF (ground beef), GPOUL
(ground poultry), BEEF, VEAL, CHCKE (chicken), PORK, POULT (poultry) , LAMB & FISH.
3. Press TASTE to select the level of doneness for the meat type selected. RARE, MED
RARE, MEDIUM, MED WELL and WELL DONE.
Note: The temperature displayed to the right of the actual meat temperature PROBE TEMP
will show the preset temperature TEMP SET according to USDA doneness levels. Example:
Beef will be Well Done at 165 °F.
4. Once the temperature of meat reaches the preset doneness level the Unit will beep and
the LCD backlight will turn red.
Measure meat temperature set to your specific taste
1. Press MODE to select thermometer mode. The upper display will show a small MEAT
and a meat type such as BEEF.
2. Press HR or MIN to raise or lower the set temperature. As you press HR or Min the
display changes to PROG (program). Holding the button will raise or lower the temperature
setting rapidly. Pressing MEAT will return you to the preset USDA ranges.
3. Once the temperature of meat reaches the preset doneness level the UNIT will beep and
the LCD backlight will turn red.
Using the Timer
Count down
1. Press MODE to select timer mode. The upper display will show a small TIMER and 0:00.
2. Press HR and MIN button to set the timer. Press START/STOP button to start
countdown. “T” will blink for every second.
3. To stop the countdown process, press START/STOP button. The “T” becomes solid.
4. Press HR & MIN buttons together to clear the setting back to 0:00.
Note: The minimum setting for the timer is 1 minute. When the timer counts down below 1
hour 1:00 the display will change to 59’59” display advising 59 minutes 59 seconds. The
seconds will be shown counting down then. When the countdown reaches 0’00” the timer
starts counting up and it will beep for 60 seconds. The timer and “ST” will blink. Press the
START/STOP button to stop beeping. When the count up reaches 23:59:59 (59 seconds
are not displayed) the display will turn to 0:00, the unit beeps and “ST” will blink for 60
seconds.
Count up
1. Press MODE to select timer mode. The upper display will show a small TIMER and 0:00.
2. Press START/STOP button to start count up. The “S” will blink for every second.
3. To stop the count up process , press START/STOP button. The “S” becomes solid.
4. Press CLEAR button to clear the setting back to 0:00.
HELPFUL HINTS
Do not use the probe wire above 662 °F (350 °C).
Do not allow the probe or probe wire to come into contact with flames. If cooking
with grill cover closed, only use medium or low heat.
If the LCD display LLL or HHH instead of the probe temperature, wait for probe to reach
room temperature. If LLL or HHH is still displayed it is likely the internal probe wire has
shorted out either through moisture or heat damage.
If the probe becomes defective within 90 day warranty period please return defective
probe to address below along with return address and we will send you new probe
no charge.
If the temperature displayed seems to read too high or the temperature seems to increase
too quickly check to make sure the probe tip is not poking through the food to outside.
Reposition the probe tip in the center of the thickest part of food. Avoid touching bone or
heavy fat areas.
Cautions:
Not Intended for Use by Persons ages 12 and under.
Do not use the UNIT in the rain. It is not waterproof.
Do not expose the plug of the stainless steel probe or the plug in hole of the Unit to
water or any liquid. This will result in a bad connection and faulty readings.
Do not expose the Unit to direct heat or surface heat.
Do not use stainless steel probe in microwave oven.
Cleaning
Wash the metal probe tip with hot soapy water and dry thoroughly. Do not immerse the
probe in water while cleaning.
Wipe the UNIT with damp cloth. Do not immerse in water.
LIMITED NINETY DAY WARRANTY
Maverick Industries Inc. warrants the Professional Cooking Thermometer to be free of
defects in parts, materials and workmanship for a period of 90 days, from date of purchase.
Should any repairs or servicing under this warranty be required, contact Maverick
Customer Service by mail or phone for instructions on how to pack and ship the
Professional Cooking Thermometer to Maverick's National Service Center located as
follows:
Maverick Customer Service
94 Mayfield Ave.
Edison NJ 08837
www.maverickhousewares.com
Telephone: (732) 417-9666
Hours: Weekdays 8:30 AM- 4:30 PM
Do not send any parts or product to Maverick without calling and obtaining a Return
Authorization Number and instructions.
This warranty is VOID if instructions for use are not followed; for accidental damage; for
commercial use; for damage incurred while in transit; or if the Professional Remote
Cooking Thermometer has been tampered with.
This warranty gives you specific legal rights and you may also have other rights which vary
from state to state.

Produkt Specifikationer

Mærke: Maverick
Kategori: Madtermometer
Model: Digital Chef

Har du brug for hjælp?

Hvis du har brug for hjælp til Maverick Digital Chef stil et spørgsmål nedenfor, og andre brugere vil svare dig


Madtermometer Maverick Manualer

Maverick

Maverick XR-40 Manual

1 September 2024
Maverick

Maverick Digital Chef Manual

7 August 2024
Maverick

Maverick ET-735 Manual

3 August 2024
Maverick

Maverick DT-13 Manual

22 Juli 2024

Madtermometer Manualer

Nyeste Madtermometer Manualer

Testo

Testo 270 BT Manual

3 Januar 2025
FCC BBQ

FCC BBQ FCC-A-10031 Manual

28 December 2024
La Crosse Technology

La Crosse Technology 314-1410 Manual

26 December 2024
TFA

TFA Hyper BBQ 14.1513.01 Manual

7 December 2024
TFA

TFA 14.1510 Manual

7 December 2024
Velleman

Velleman DTP10 Manual

4 December 2024
Patton

Patton Emax Bluetooth Smart thermometer I Manual

6 Oktober 2024
Hendi

Hendi 271315 Manual

21 September 2024
Laserliner

Laserliner ThermoSpot Manual

14 September 2024
Taylor

Taylor 9840 Manual

9 September 2024