Maxell IKUtrax MXSP-BT150 Manual

Maxell Vugge & Dockingstation IKUtrax MXSP-BT150

Læs gratis den danske manual til Maxell IKUtrax MXSP-BT150 (7 sider) i kategorien Vugge & Dockingstation. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Maxell IKUtrax MXSP-BT150, eller vil du spørge andre brugere om produktet?

Side 1/7
IKUtrax
(MXSP-BTS150)
OUTDOOR BLUETOOTH® SPEAKER
WITH NFC FUNCTION
USER MANUAL
PRODUCT FEATURES
The Maxell IKUtrax is an Outdoor Bluetooth portable Speaker with the following features:
Wireless playback of music from your Bluetooth enabled mobile phone or devices via
the connection Bluetooth
Water Resistant & Dustproof (IP55), and Shock Resistant.
NFC Connectivity
Up to 33 feet (10 meters) line- -sight operating distance of
Hands-free phone conversation
Remotely control your music (play, pause, next track, previous track)
Aux-in connection providing instant 3.5mm stereo audio cable connection to any device.
GETTING STARTED
Carefully remove the unit and all the accessories from the packaging. Please verify
that you have the Quick Start Guide, 3.5mm AUX-in cable and Micro charging USB
cable before recycling the box.
Fully charge your IKUtrax before initial use.
Use the included Micro cable to connect your MXSP-BTS150 to the USB slot of USB
any PC to charge. The RED LED will turn on while charging and will turn off
automatically when fully charged.
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS
UNIT AND RETAIN THIS GUIDE FOR FUTURE REFERENCE.
PAIRING MODE
From OFF, Push and hold the centre button for 8 seconds. After 5 seconds the
speaker will indicate that it is ON. Keep holding without releasing for another 3
seconds, and the speaker will enter Pairing Mode. The LED light will flash Blue
rapidly.
See your phone/music device manual for pairing instructions.
Then you will hear a voice prompt while the Pairing successful.
LOCATION OF CONTROLS
TOP SIDE
1. FUNCTION BUTTON (ON/ OFF, PLAY/ STOP, PAIR OR PICK UP/ HANG UP)
2. VOLUME UP OR NEXT SONG
3. VOLUME DOWN OR PREVIOUS SONG
4. LED POWER / CHARGING / PAIRING STATUS INDICATOR
5. NFC PAIRING AREA
6. MICROPHONE
7. HOOK FOR WRIST STRAP
8. 3.5MM AUX IN JACK
9. CHARGING JACK(MICRO USB)
LED INDICATOR
LED COLOUR
DESCRIPTION
Blue ashing every 1 sec.
Power ON
Red ashing every 1 sec.
Power OFF
Blue ashing every 1 sec.
Standby
Blue ashing every 0.1 sec.
Pairing
Blue ashing every 5 sec.
Connected
Blue ashing every 1 sec.
Disconnect ed
Red ashing every 0.1 sec.
Low Power (standby)
Red light on
Charging


Produkt Specifikationer

Mærke: Maxell
Kategori: Vugge & Dockingstation
Model: IKUtrax MXSP-BT150
Kode for international beskyttelse (IP): IP55
Bredde: 115 mm
Dybde: 60 mm
Højde: 60 mm
Vægt: 272 g
Antal pr. pakke: 1 stk
Brugervejledning: Ja
Produktfarve: Blå
Produkttype: Bærbar stereohøjttaler
Pakkevægt: 350 g
Pakkedybde: 72 mm
Pakkebredde: 139 mm
Pakkehøjde: 68 mm
Bluetooth: Ja
Antal højttalere: 1
Udgangseffekt (RMS): 5 W
Volumenkontrol: Digital
Beskyttelsesfunktioner: Dust resistant, Water resistant
Hurtig start guide: Ja
Kabler inkluderet: Audio (3.5mm), USB
Pakketype: Kasse
Bluetooth-version: 3.0+HS
Bluetooth-profiler: A2DP, AVRCP, HFP, HSP
Anbefalet brug: Mobiltelefon / Smartphone
Frekvensområde: 150 - 20000 Hz
Impedens: 4 ohm (Ω)
Forbindelsesteknologi: Kabel & trådløs
Lyd-output kanaler: 1.0 kanaler
Near Field Communication (NFC): Ja
Strømkilde type: Battery, USB
Batterilevetid (maks.): 8 t
3,5 mm stik: Ja
Batteritype: Indbygget
AUX-indgang: Ja
Opladningstid for batteri: 2.5 t
Indbygget mikrofon: Ja
Antal drivere: 2
Forstærker: Indbygget
Produktdesign: Rektandel
Bluetooth-område: 10 m
USB-opladningsport: Ja
Driftstemperatur (køling) (T-T): 0 - 50 °C
USB-opladning: Ja
Krog: Ja

Har du brug for hjælp?

Hvis du har brug for hjælp til Maxell IKUtrax MXSP-BT150 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Vugge & Dockingstation Maxell Manualer

Vugge & Dockingstation Manualer

Nyeste Vugge & Dockingstation Manualer