Maytag MIM1555ZRS Manual

Maytag Ismaskine MIM1555ZRS

Læs gratis den danske manual til Maytag MIM1555ZRS (24 sider) i kategorien Ismaskine. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Maytag MIM1555ZRS, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/24
ICE MAKER INSTALLATION INSTRUCTIONS
INSTRUCTIONS D’INSTALLATION DE
LA MACHINE À GLAÇONS
ICE MAKER SAFETY
Table of Contents/Table des matières
ICE MAKER SAFETY......................................................................1
INSTALLATION INSTRUCTIONS..................................................2
Unpack the Ice Maker..................................................................2
Location Requirements................................................................2
Electrical Requirements ...............................................................3
Water Supply Requirements........................................................3
Vacation or Extended Time Without Use.....................................3
Connect Water Supply.................................................................3
Ice Maker Drain Pump Installation...............................................4
Drain Connection .........................................................................7
Ice Maker Door Reversal—Side Swing Only ...............................8
Leveling ......................................................................................10
Cleaning......................................................................................10
SÉCURITÉ DE LA MACHINE À GLAÇONS ................................12
INSTRUCTIONS D’INSTALLATION.............................................13
Déballage de la machine à glaçons ...........................................13
Exigences d’emplacement.........................................................13
Spécifications électriques ..........................................................13
Spécifications de l’alimentation en eau .....................................14
Vacances ou longue période d’inutilisation ...............................14
Raccordement à la canalisation d’eau.......................................14
Installation de la pompe de vidange de
la machine à glaçons..................................................................15
Raccordement au drain de vidange...........................................18
Inversion du sens d’installation de la machine à glaçons—
Porte à ouverture latérale uniquement.......................................19
Nivellement.................................................................................21
Nettoyage ...................................................................................22
W10541636B
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
IMPORTANT SAFETY INSTRUCTIONS
WARNING
: To reduce the risk of fire, electric shock, or injury when using your ice maker, follow these basic
precautions:
SAVE THESE INSTRUCTIONS
■
Plug into a grounded 3 prong outlet.
■
Do not remove ground prong.
■
Do not use an adapter.
■
Do not use an extension cord.
■
Disconnect power before manually cleaning the inside components.
■
Disconnect power before servicing.
■
Replace all parts and panels before operating.
■
Use two or more people to move and install ice maker.
2
INSTALLATION INSTRUCTIONS
Unpack the Ice Maker
Removing Packaging Materials
Remove tape and glue from your ice maker before using.
■To remove any remaining tape or glue from the exterior of the
ice maker, rub the area briskly with your thumb. Tape or glue
residue can also be easily removed by rubbing a small
amount of liquid dish soap over the adhesive with your
fingers. Wipe with warm water and dry.
■Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. Do not
use chlorine bleach on the stainless steel surfaces of the ice
maker. These products can damage the surface of your
ice maker.
Cleaning Before Use
After you remove all of the packaging materials, clean the inside
of your ice maker before using it. See the cleaning instructions in
the “Ice Maker Care” section.
Location Requirements
■To ensure proper ventilation for your ice maker, the front side
must be completely unobstructed. The ice maker may be
closed-in on the top and three sides, but the installation
should allow the ice maker to be pulled forward for servicing
if necessary.
■Installation of the ice maker requires a cold water supply inlet
of ¹⁄₄" (6.35 mm) OD soft copper tubing with a shutoff valve or
a Whirlpool supply line Part Number 8212547RB, and a
Whirlpool approved drain pump, Part Number 1901A, only to
carry the water to an existing drain.
■Choose a well ventilated area with temperatures above 55°F
(13°C) and below 110°F (43°C). Best results are obtained
between 70°F and 90°F (21ºC and 32°C).
■The ice maker must be installed in an area sheltered from the
elements, such as wind, rain, water spray, or drip.
■When installing the ice maker under a counter, follow the
recommended opening dimensions shown. Place electrical
and plumbing fixtures in the recommended location as
shown.
NOTES:
■Check that the power supply cord is not damaged, or
pinched or kinked between the ice maker and the
cabinet.
■Check that the water supply line is not damaged, or
pinched or kinked between the ice maker and the
cabinet.
■Check that the drain line (on some models) is not
damaged, or pinched or kinked between the ice maker
and the cabinet.
■Check that the ice maker door is not flush with the front of
standard cabinets to avoid problems with opening the ice
maker door.
■Choose a location where the floor is even. It is important for
the ice maker to be level in order to work properly. If needed,
you can adjust the height of the ice maker by changing the
height of the leveling legs. See “Leveling.”
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
WARNING
Excessive Weight Hazard
Use two or more people to move and install ice maker.
Failure to do so can result in back or other injury.
A. Recommended location for electrical
and plumbing fixtures
B. Floor level
C. 15" or 18" (38.1 cm or
45.7 cm) depending on
model
3¹⁄₂"
(8.9 cm)
9"
(22.9 cm)
11 "¹⁄₂
(29.2 cm)
24"
(60.1 cm)
34"
(86.4 cm)
Min.
34 "¹⁄₂
(87.6 cm)
Max.
B
A
28 "¹⁄₂
(72.4 cm)
C

Produkt Specifikationer

Mærke: Maytag
Kategori: Ismaskine
Model: MIM1555ZRS

Har du brug for hjælp?

Hvis du har brug for hjælp til Maytag MIM1555ZRS stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ismaskine Maytag Manualer

Maytag

Maytag MIM1554ZRS Manual

24 August 2024
Maytag

Maytag MIM1555ZRS Manual

22 Januar 2023

Ismaskine Manualer

Nyeste Ismaskine Manualer

Carnival King

Carnival King IBS250 Manual

17 Juni 2025
Hatco

Hatco FTBR-1 Manual

16 Juni 2025
Hatco

Hatco CSBF-48-I Manual

16 Juni 2025
Hatco

Hatco FTBP-3 Manual

16 Juni 2025
Hatco

Hatco CSUP-24 Manual

15 Juni 2025
Hatco

Hatco HCSBF-36-I Manual

15 Juni 2025
Hatco

Hatco FTBP-2 Manual

15 Juni 2025
Scotsman

Scotsman CU3030 Manual

15 Juni 2025
Hoshizaki

Hoshizaki HS-2129 Manual

15 Juni 2025
Hatco

Hatco FTBP-S2 Manual

15 Juni 2025