Installaon Manual
Type：
：
：
：：Adaptor（
（
（
（（Families GS, GST, GSM, GE, GEM, OWA, P
：
：
：
：： , SGA）
）
）
））
Introducon
Adaptor is a kind of external switching power supply, which is designed to connect pieces of electrical equipment
externally. Mean Well’s adaptor types include industrial, moisture proof, and medical.
Installaon
（ ）1 Before aaching the DC plug of an adaptor to equipment, please unplug the adaptor from the AC power and
verify the unit is within the voltage and current rang on the equipment.
（ ）2 Keep the linkage between the adaptor and its power cord ghtly as well as connecng the DC plug to
equipment properly.
（ ）3 Protect the power cord from being trodden on or being squashed.
（ ）4 Keep good venlaon for the unit in use to prevent it from overheang. Also a 10-15 cm clearance must be
kept when the adjacent device is a heat source.
（ ）5 An approved power cord should greater or equal to SVT, 3G×18AWG or H03VV-F, 3G×0.75mm
2.
（ ）6 If the nal equipment is not used for long period of me, disconnect the equipment from power supply to
avoid being damaged by voltage peaks or lightning strike.
（ ）7 For other informaon about the products, please refer to www.meanwell.com for details.
Warning / Cauon !!
（ ）1 Risk of electrical shock and energy hazard. A failure should be examined by a qualied technician. Please do ll
not remove the case of the adaptor by yourself!
（ ）2 Risk of re or electrical shock. The openings should be protected from foreign objects or dripping liquids.
（ ）3 Using wrong DC plug or forcing a DC plug into an electronic device may damage the device or cause to
malfuncon. Please refer to DC plug compability informaon shown in specicaon sheets.
（ ）4 Adaptors should be placed on a reliable surface. A drop or fall could cause damage.
（ ）5 Please do not put adaptors in places with high moisture or near the water.
（ ）6 Please do not put adaptors in places with high ambient temperature or near re source. About the maximum
ambient temperature, please refer to their specicaons.
（ ）7 Output current and output waage must not exceed the rated values on specicaons.
（ ）8 Disconnect the unit from the AC power before cleaning. Do not use any liquid or aerosol cleaner. Only use a
damp cloth to wipe it.
（ ）9 Please contact your local qualied recyclers when you want to dispose this product.
