Megger TPT320 Manual

Megger Skruemaskine TPT320

Læs gratis den danske manual til Megger TPT320 (100 sider) i kategorien Skruemaskine. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Megger TPT320, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/100

TPT320

Two pole

voltage tester

User guide

Mode d’emploi

Bedienungsanleitung

Guía de usuario

Handleiding

Guida per l’utente

Podręcznik użytkownika

Kullanım kılavuzu

023TPT

בודק מתח

דו קוטבי

מדריך למשתמש

G Safety Warnings

Before commencing any testing, short the prods

together to check the batteries.

The TPT320 is designed to offer a high

degree of safety. It conforms to standards

DIN VDE 0682-401 and IEC/EN 61243-3.

To ensure that the unit is operated safely,

please read the following instructions

before using the device.

■ Do not use the instrument in a humid

environment.

■ Before testing a live circuit the voltage tester

should be checked by connecting to a

known voltage source (e.g. a suitable 120

/ 230 V outlet or a suitable proving unit)

before and after use.

■ Tests for voltage should be made with both

poles.

■ Extreme care must be conducted when

testing voltages above 50 V AC / 120 V DC.

■ Ensure the tester is only used within the

stated measurement ranges and in low

voltage installations up to 690 V and in the

measuring category it has been designed for.

■ When testing ensure hands are behind the

barriers on the main body and remote probe.

Avoid touching the tips.

■ The instrument must be in good order, clean,

dry and with no broken case or damaged

lead or probes.

■ Do not use the unit with battery cap

removed and ensure when changing the

batteries no probe is connected to any

circuits.

■ Do not use the instrument if one or more

functions are not working correctly.

■ The voltage warning triangle F LED

will illuminate to indicate voltage is present at

the tips in the event of exhausted batteries

while testing. This must not be used for

measuring purposes.

■ The audible indication should be considered

for audibility in noisy environments.

■ Remove the batteries if the tester is not to be

used for a long period of time.

■ The voltage tester must not be used with

exhausted or leaked batteries. Danger of

electric shock!

General point: Voltage tests have priority on the

TPT320. If no voltage is detected at the probe tip

(<10 V), the device is in continuous test mode.

Produkt Specifikationer

Mærke:	Megger
Kategori:	Skruemaskine
Model:	TPT320
Kode for international beskyttelse (IP):	IP64
Antal pr. pakke:	1 stk
Produktfarve:	Black, White
Indbygget skærm:	Ja
Skærmtype:	LCD
Indgående driftsspænding (maks.):	690 V
Indgående driftsspænding (min.):	12 V