Mercury 2WID001 Manual


Læs gratis den danske manual til Mercury 2WID001 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Mercury 2WID001, eller vil du spørge andre brugere om produktet?

Side 1/3
www.av .comsl 5UK User Manual 350.00
2.4Ghz Wireless Digital Intercom
Order ref: 350. 5 00 UK
User Manual
A stylish and attractive wireless digital intercom that allows you to talk to your visitors before opening the
door. No wires are required between the outdoor and indoor units making this system very simple to
install. Both units are powered by a rechargeable battery with the indoor unit doubling as a battery
charger when connected to a suitable USB power source using the charging lead provided. Its also
possible to connect the outdoor unit to an electronic door lock, utilising the door release button on the
indoor unit. Ideal for use in domestic and business applications and helpful for the elderly or less mobile.
Features:
Simple wire free installation and setup
Up to 500m transmission range
8 Ringtones and adjustable ring volume
Recharge the batteries using the indoor unit and USB charging lead (supplied)
Weatherproof outdoor unit can be connected to an electronic lock (not supplied) when connected to
mains power
Outdoor unit can also be mains powered using additional 12V PSU 350.006UK (not supplied)
LED indicators for low battery warning and battery charging status
In the box:
Outdoor unit (IP44)
Indoor t uni
Rain shade for outdoor unit
2pcs DC3.7V Rechargeable battery
USB charging lead (1m)
Electronic lock connecting wire
Fixing kit
User guide
Installation:
Outdoor unit
1. Fasten the rain shade on the wall around 1.4~1.7m
above the ground using the screws and plugs provided
in the fixing kit.
2. Open the battery cover using a small Philips screwdriver
and insert one of the DC3.7V rech geable batteries ar
ensuring the correct polarity.
3. Replace the cover and screw then s the unit to the lot in
rain shade.
4. Secure the unit from underneath using the fixing screw
provided in the fixing kit.
5. Its also possible to power the outdoor unit using an
additional DC12V mains power supply (350.006UK not
www.av .comsl 5UK User Manual 350.00
supplied). If mains installation is required, please use a qualified electrician and ensure the
rechargeable battery is removed before installation.
Indoor unit
1. The indoor unit can simply be d on a suitable flat stoo
surface or hung on a wall using the fixing screws provided
and keyhole slots in the back of the unit.
2. Please ensure the unit is kept in a dry environment away
from direct sunlight and any wireless items that may
interfere with the signal such as cordless phones, door in
aerials or WiFi hubs and routers.
3. Open the battery cover using a small Philips screwdriver
and insert one of the DC3.7V rech geable batteries ar
ensuring the correct polarity.
4. Replace the cover and screw to secure the unit.
5. There is also a USB charging port on the top of the indoor
unit which can be used to charge up the batteries used in
both units.
6. Simply insert the USB charging cable provided into the charging port and connect the c le to a ab
suitable USB power source.
7. During charging the unlock button will flash, then go out once the
battery is fully charged.
Electronic door lock
1. Its possible to connect the outdoor unit to an additional elec ic tron
door lock (not supplied) using the connecting wire provide d.
2. This is only possible if the outdoor unit is connected to mains power
using the additional 12V power supply mentioned above.
3. It recommended to use RVV2 x 1.0mm² cable to connect to the is
electronic door lock.
4. Once the door lock is connected correctly the unlock button will also
be activated the indoor unit. on
NOTE: it is recommended that all wiring connections for both the
electronic door lock and 12V DC power supply are undertaken by a
qualified electrician.
Operation:
1. When the call button is pressed on the outdoor
unit, the indoor unit chi will sound and the LED me
on the talk button will illumina . te
2. Press the talk button to acknowledge and talk
with your visitor and press again to end the
conversation.
3. If an electronic door lock is connected you can
also press the unlock button to admit your visitor
entry to your property.
4. It i possible to select a different chime on the s
indoor unit. Simply scroll through the 8 available
melodies by pressing the chime selection button
repeatedly.


Produkt Specifikationer

Mærke: Mercury
Kategori: Ikke kategoriseret
Model: 2WID001

Har du brug for hjælp?

Hvis du har brug for hjælp til Mercury 2WID001 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Mercury Manualer

Mercury

Mercury MKA 1919 Manual

5 September 2024
Mercury

Mercury TLD Manual

5 September 2024
Mercury

Mercury ST-18 Manual

5 September 2024
Mercury

Mercury CMTS01 Manual

1 September 2024
Mercury

Mercury MTS01 Manual

1 September 2024
Mercury

Mercury UK2US100VA Manual

29 August 2024
Mercury

Mercury DC1248UK Manual

28 August 2024
Mercury

Mercury USB-C224 Manual

25 August 2024
Mercury

Mercury CB-R30 Manual

16 August 2024
Mercury

Mercury 2WDP001 Manual

15 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer