Mercusys MA70XE Manual

Mercusys Ikke kategoriseret MA70XE

Læs gratis den danske manual til Mercusys MA70XE (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Mercusys MA70XE, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Turn off your computer, unplug the power

cable then remove the case panel.

b. Connect the provided Bluetooth USB cable to

the adapter.

Note: If the Bluetooth USB cable is not correctly connected to

the motherboard, Bluetooth function won’t work even after

driver installation.

2 Connect to a Computer

c. Locate an available slot PCI-E ( X1, X4, X8, or

X16) and carefully insert the adapter.

d. Locate an available connector and F_USB

carefully plug the Bluetooth USB cable into it.

WLAN Bluetooth

PCI Express Adapter

Quick Installation Guide

To continue, ip the page over.

Bluetooth USB cable

Adapter

Images may dier from your actual product.

1 Disable Bluetooth

a. Right-click , select , go My Computer Manage

to Device Manager.

b. Expand the Bluetooth node to nd your

existing Bluetooth device.

c. Right-click the existing Bluetooth device and

select .Disable

Note: Make sure you have disabled all existing Bluetooth

devices (both built-in and third party).

Bluetooth

Device Manager

Disable

Existing Bluetooth Adapter

Before You Start:

1. If you plan on using Bluetooth and already

have connected Bluetooth devices, proceed

with step 1. Otherwise, skip to step 2.

2. For Wi-Fi 7 models, make sure you are using

Windows 11(64-bit) or above, and your Router

or Access Point supports the Wi-Fi 7 standard.

Note: If the bracket is not suitable for your computer, detach

it from the adapter's board and replace it with the low-prole

bracket.

USB

4 Join a Wireless Network

a. Click the network icon on the taskbar (the

icon might look like one of these: , , ,

or ).

5 Pair With Bluetooth Devices

c. Select your Bluetooth device from the list and

follow the onscreen instructions to complete

pairing.

Note: Make sure your device’s Bluetooth is enabled and

discoverable.

3 Install Drivers

a. Autorun.exeInsert the CD and run the .e. Replace the case panel, plug in the power

cable and turn on your computer.

b. Select your Wi-Fi network, click , and Connect

enter the password when prompted.

b. Select Add a Bluetooth Device Add a or

Device to scan for available devices.

b. Install the Wi-Fi and Bluetooth drivers .

Tip: You can also check the new release and download

the driver at www.mercusys.com/support.

① Wi-Fi: Click and follow the onscreen

instructions to complete the Wi-Fi installation.

② Bluetooth: Click and follow the onscreen

instructions to complete the Bluetooth

installation.

a. Right click the (Bluetooth) icon on the

taskbar. If it's not displayed, turn on Bluetooth

in your PC settings rst.

· Keep the device away from water, re, humidity or hot

environments.

· Do not attempt to disassemble, repair, or modify the device. If

you need service, please contact us.

· Do not use the device where wireless devices are not allowed.

· This equipment can be powered only by equipments that

comply with Power Source Class 2 (PS2) or Limited Power

Source (LPS) dened in the standard of IEC 62368-1.

Mercusys hereby declares that the device is in compliance with

the essential requirements and other relevant provisions of

directives 2014/53/EU, 2011 /65/EU and (EU) 2015/863. The

original EU Declaration of Conformity may be found at

https://www.mercusys.com/en/ce

Mercusys hereby declares that the device is in compliance with

the essential requirements and other relevant provisions of the

Radio Equipment Regulations 2017. The original UK Declaration

of Conformity may be found at

https://www.mercusys.com/support/ukca/

Support

For technical support, the user guide and more information,

please visit .https://www.mercusys.com/support

Add a device

Mouse

Connect Cancel

Anna’s Phone

Connect

Secured

MERCUSYS_XXXX

Network settings

Notes:

• DO NOT run the driver installations at the same time. When

one driver is being installed, please wait until the installation

is complete and then try to install the other.

• If an unknown publisher message pops up, select Yes to

continue.

• If Windows User Account Control requires admin

credentials, type user name and password of your Windows

administrator account.

Safety Information

Produkt Specifikationer

Mærke:	Mercusys
Kategori:	Ikke kategoriseret
Model:	MA70XE

Har du brug for hjælp?

Hvis du har brug for hjælp til Mercusys MA70XE stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Mercusys Manualer

Mercusys MA12N Manual

19 August 2025

Mercusys MA37BE Manual

24 Juli 2025

Mercusys MA550H Manual

24 Juli 2025

Mercusys MA14H Manual

24 Juli 2025

Mercusys MS120GP Manual

24 Juli 2025

Mercusys MS106P Manual

6 Juni 2025

Mercusys MS124GS Manual

4 Juni 2025

Mercusys MS110CMP Manual

4 Juni 2025

Mercusys MS118CP Manual

3 Juni 2025

Mercusys MA310E Manual

3 Juni 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ResMed Narval CC Manual

19 Oktober 2025

Dormakaba CenTran 4 Manual

19 Oktober 2025

ResMed AirFit N10 Manual

19 Oktober 2025

CRUX SWRCR-59LV Manual

19 Oktober 2025

Dormakaba Crane S1 Manual

19 Oktober 2025

Shape BP8000 Manual

19 Oktober 2025

Shape ALPKIT Manual

19 Oktober 2025

Shape COMPOFIC Manual

19 Oktober 2025

ResMed AirFit F10 Manual

18 Oktober 2025

Dormakaba Auditcon T52 Manual

18 Oktober 2025