Metabo 3608DA Manual

Metabo Sander 3608DA

Læs gratis den danske manual til Metabo 3608DA (73 sider) i kategorien Sander. Denne vejledning er vurderet som hjælpsom af 48 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 24.5 anmeldelser. Har du et spørgsmål om Metabo 3608DA, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/73
Model
Modèle
Modelo SB 3608DA
Cordless Belt Sander
Sableuse à courroie sans fi l
Lijadora de banda inalámbrica
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand
this manual BEFORE operating the power tool. Please keep this manual available for other
users and owners before they use the power tool. This manual should be stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la mort
ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent
l’outil motorisé. Ce mode d’emploi doit être conservé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual
para que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este manual
debe ser guardado en un lugar seguro.
Designed for operating in USA & Canada only.
When this product is used in areas other than the USA & Canada,
we cannot guarantee the product quality and performance.
Without charger and battery
Sans chargeur et batterie
Sin cargador y batería
2
English
IMPORTANT SAFETY INFORMATION
Read and understand all of the safety precautions, warnings and operating instructions in the Instruction Manual before
operating or maintaining this power tool.
Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety
rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation before it occurs,
and by observing appropriate safety procedures.
Basic safety precautions are outlined in the “SAFETY” section of this Instruction Manual and in the sections which
contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identifi ed by WARNINGS on the power
tool and in this Instruction Manual.
Never use this power tool in a manner that has not been specifi cally recommended by metabo HPT.
MEANINGS OF SIGNAL WORDS
WARNING indicates a potentially hazardous situations which, if ignored, could result in death or serious injury.
CAUTION indicates a potentially hazardous situations which, if not avoided, may result in minor or moderate injury, or
may cause machine damage.
NOTE emphasizes essential information.
SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings, instructions, illustrations and specifi cations provided with this power tool.
Failure to follow all instructions listed below may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
fl ammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodifi ed plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool.
Keep cord away from heat, oil, sharp edges
or moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces the risk of electric shock.

Produkt Specifikationer

Mærke: Metabo
Kategori: Sander
Model: 3608DA

Har du brug for hjælp?

Hvis du har brug for hjælp til Metabo 3608DA stil et spørgsmål nedenfor, og andre brugere vil svare dig


Sander Metabo Manualer

Metabo

Metabo SRE 4351 TurboTec Manual

8 September 2024
Metabo

Metabo DBF 457 Manual

27 August 2024
Metabo

Metabo M3612DA Manual

24 August 2024
Metabo

Metabo SV 1813DA Manual

24 August 2024
Metabo

Metabo M1808DA Manual

24 August 2024
Metabo

Metabo 3608DA Manual

24 August 2024
Metabo

Metabo P18DSLQ4 Manual

24 August 2024
Metabo

Metabo SV12SG Manual

24 August 2024
Metabo

Metabo RSEV 17-125 Manual

24 August 2024
Metabo

Metabo WP 18 LTX 150 Manual

3 August 2024

Sander Manualer

Nyeste Sander Manualer

Kraftronic

Kraftronic KT-XS 420 Manual

29 Marts 2025
Kraftronic

Kraftronic KT-SS 250 Manual

29 Marts 2025
Makita

Makita BO5010 Manual

28 Marts 2025
Makita

Makita BO4554 Manual

28 Marts 2025
Bosch

Bosch GSS 140 A Manual

15 Januar 2025
Hazet

Hazet 9032M-53 Manual

1 Januar 2025
Alpha Tools

Alpha Tools DS 150 Manual

28 December 2024
Alpha Tools

Alpha Tools BBS 240 Manual

28 December 2024
Alpha Tools

Alpha Tools NTS 150/200 Manual

28 December 2024
RIKON

RIKON 50-300 Manual

27 December 2024