Metabo C1807DAQ4 Manual

Metabo Sav C1807DAQ4

Læs gratis den danske manual til Metabo C1807DAQ4 (84 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Metabo C1807DAQ4, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/84
Model
Modèle
Modelo
C 1807DA
Cordless Circular Saw
Scie circulaire sans fi l
Sierra circular a batería
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool. This manual should be
stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la
mort ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent
l’outil motorisé. Ce mode d’emploi doit être conservé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual
para que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este
manual debe ser guardado en un lugar seguro.
Designed for operating in USA & Canada only.
When this product is used in areas other than the USA & Canada,
we cannot guarantee the product quality and performance.
00BookC1807DANA.indb100BookC1807DANA.indb1 2021/08/1712:23:052021/08/1712:23:05
IMPORTANT SAFETY INFORMATION
Read and understand all of the safety precautions, warnings and operating instructions in the Instruction Manual before
operating or maintaining this power tool.
Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety
rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation before it occurs,
and by observing appropriate safety procedures.
Basic safety precautions are outlined in the “SAFETY” section of this Instruction Manual and in the sections which
contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identifi ed by WARNINGS on the power
tool and in this Instruction Manual.
NEVER use this power tool in a manner that has not been specifi cally recommended by metabo HPT.
MEANINGS OF SIGNAL WORDS
WARNING indicates a potentially hazardous situations which, if ignored, could result in death or serious injury.
CAUTION indicates a potentially hazardous situations which, if not avoided, may result in minor or moderate injury, or
may cause machine damage.
NOTE emphasizes essential information.
SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings, instructions, illustrations and specifi cations provided with this power tool.
Failure to follow all instructions listed below may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
fl ammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
2
English
00BookC1807DANA.indb200BookC1807DANA.indb2 2021/08/1712:23:062021/08/1712:23:06

Produkt Specifikationer

Mærke: Metabo
Kategori: Sav
Model: C1807DAQ4

Har du brug for hjælp?

Hvis du har brug for hjælp til Metabo C1807DAQ4 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Sav Metabo Manualer

Metabo

Metabo C1807DAQ4 Manual

11 September 2025
Metabo

Metabo C10FSHC Manual

11 September 2025
Metabo

Metabo C 3610DRA Manual

7 September 2025
Metabo

Metabo CB 3612DA Manual

7 September 2025
Metabo

Metabo C 3607DRA Manual

7 September 2025
Metabo

Metabo KGS 18 LTX BL 305 Manual

7 August 2025
Metabo

Metabo KGS 18 LTX BL 216 Manual

7 August 2025
Metabo

Metabo KT 66 BL Manual

7 August 2025
Metabo

Metabo C 8FSE Manual

7 August 2025
Metabo

Metabo ST 18 LT 130 BL Manual

7 August 2025

Sav Manualer

Nyeste Sav Manualer

Hitachi

Hitachi C 15FB Manual

11 September 2025
Flex

Flex GCS 35 2x18-EC Manual

11 September 2025
Hitachi

Hitachi C 10FSHC Manual

11 September 2025
Tacklife

Tacklife RSK710 Manual

10 September 2025
Evolution

Evolution RAGE7 Manual

10 September 2025
Graphite

Graphite 59G801 Manual

8 September 2025
DeWalt

DeWalt DWCS600 Manual

8 September 2025
DeWalt

DeWalt DCCS620 Manual

8 September 2025
DeWalt

DeWalt DWOAS6PS Manual

8 September 2025
DeWalt

DeWalt DCM200 Manual

8 September 2025