Metabo DS 18DGL Manual

Metabo Boremaskine DS 18DGL

Læs gratis den danske manual til Metabo DS 18DGL (61 sider) i kategorien Boremaskine. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Metabo DS 18DGL, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/61
Designed for operating in USA & Canada only.
When this product is used in areas other than the USA & Canada,
we cannot guarantee the product quality and performance.
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand
this manual BEFORE operating the power tool. Please keep this manual available for other
users and owners before they use the power tool. This manual should be stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la mort
ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent
l’outil motorisé. Ce mode d’emploi doit être conservé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para
que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este manual debe
ser guardado en un lugar seguro.
Model
Modèle
Modelo
DS 18DGL
Cordless Driver Drill
Perceuse-visseuse sans fi l
Taladro atornillador a batería
IMPORTANT SAFETY INFORMATION
Read and understand all of the safety precautions, warnings and operating instructions in the Instruction Manual before
operating or maintaining this power tool.
Most accidents that result from power tool operation and maintenance are caused by the failure to observe basic safety
rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation before it occurs,
and by observing appropriate safety procedures.
Basic safety precautions are outlined in the “SAFETY” section of this Instruction Manual and in the sections which
contain the operation and maintenance instructions.
Hazards that must be avoided to prevent bodily injury or machine damage are identifi ed by WARNINGS on the power
tool and in this Instruction Manual.
NEVER use this power tool in a manner that has not been specifi cally recommended by metabo HPT.
MEANINGS OF SIGNAL WORDS
WARNING indicates a potentially hazardous situations which, if ignored, could result in death or serious injury.
CAUTION indicates a potentially hazardous situations which, if not avoided, may result in minor or moderate injury, or
may cause machine damage.
NOTE emphasizes essential information.
SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
fl ammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodifi ed plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will increase the risk
of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords increase the risk of
electric shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the
risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
2
English

Produkt Specifikationer

Mærke: Metabo
Kategori: Boremaskine
Model: DS 18DGL

Har du brug for hjælp?

Hvis du har brug for hjælp til Metabo DS 18DGL stil et spørgsmål nedenfor, og andre brugere vil svare dig


Boremaskine Metabo Manualer

Metabo

Metabo DH 3640DA Manual

8 September 2025
Metabo

Metabo WH 18DE Manual

7 September 2025
Metabo

Metabo SB 18 L Quick Manual

20 August 2025
Metabo

Metabo KH 18 LTX BL 35 Q Manual

16 August 2025
Metabo

Metabo DH28PFY Manual

8 August 2025
Metabo

Metabo DH45MEY Manual

8 August 2025
Metabo

Metabo D13VF Manual

7 August 2025
Metabo

Metabo KC18DDX Manual

7 August 2025
Metabo

Metabo B 32/3 Manual

7 August 2025
Metabo

Metabo D10VF Manual

7 August 2025

Boremaskine Manualer

Nyeste Boremaskine Manualer

Bavaria

Bavaria BCD 18 2B Manual

29 September 2025
Bavaria

Bavaria BCD 18 Manual

29 September 2025
Bavaria

Bavaria BCD 14.4 2B Manual

29 September 2025
Bavaria

Bavaria BID 500 E Manual

29 September 2025
Bavaria

Bavaria BID 650 E Manual

29 September 2025
Bavaria

Bavaria BCD 144/2 Manual

29 September 2025
Graphite

Graphite 58G858 Manual

29 September 2025
NEO Tools

NEO Tools 04-723 Manual

28 September 2025
NEO Tools

NEO Tools 04-616 Manual

28 September 2025
Bavaria

Bavaria BCD 18 1h Manual

28 September 2025