Metra 70-1786 Manual

Metra Ikke kategoriseret 70-1786

Læs gratis den danske manual til Metra 70-1786 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Metra 70-1786, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Receiver Wiring Adaptor

120 70-1786

Revision 05/08/18

STEP 1 -- MATCH & CONNECT WIRES

*120701786*

IMPORTANT

Before starting, compare items on your invoice with items

received. Thoroughly check packing materials. If an item

is missing, please call Crutchfield at 1-888-955-6000.

Connect to RCA outputs on receiver

Yellow - 12 Volts Constant Power

Red - 12 Volts Switched Power

White - Left Front Channel

Violet - Right Rear Channel

Green - Left Rear Channel

Gray - Right Front Channel

Black - Chassis Ground

Orange/White - Illumination

Blue/White - Amplifier Turn-On

Match wires below to the matching function of each wire on your receiver (refer to instructions supplied with receiver). The wire colors of your

new receiver may, or may not, match the wire colors of the adaptor. Match adaptor and receiver wires by function, disregarding color.

Your receiver illumination wire could be Orange or Orange/White. As with other wires, match this wire to the illumination wire in this harness

by function, not by color. If your receiver does not have an illumination wire, tape off the illumination wire.

Individually tape off any unused wires.

Make final wiring connections following instructions on the next page.

1999-'03 Mercedes E-Class may not have a match for this wire. If

not, splice the Red wire from the receiver to the Black/Yellow wire

at the factory cigarette lighter.

The wire that lines up with this slot must be

spliced into the antenna/amp remote wire

on the receiver wiring harness.

120 70-1786

Page 2

STEP 2 -- CONTINUED

A. Strip wires back 1/2”.

B. Twist wires together and

insert in crimp cap.

C. Squeeze middle of cap

for tight connection.

STEP 3 -- APPLICATION

D. Complete crimp connections

for all necessary wires.

E. Be sure to wrap any wires from

the Wiring Adaptor that are

not necessary (wires with no

match from the new receiver)

with electrical tape.

STEP 2 -- CRIMP CONNECTIONS

Tools & Parts

Required

Wire Stripper/Crimp Tool Crimp Caps

Unused Wire (tape over bare wires)

Receiver Wiring Adaptor

Generic Illustration

Receiver Wiring Adaptor Connections

A. When ready to install the

receiver, plug the wiring

Adaptor from the new receiver,

or receiver assembly into the

factory radio harness(es) in the

vehicle dash.

Produkt Specifikationer

Mærke:	Metra
Kategori:	Ikke kategoriseret
Model:	70-1786

Har du brug for hjælp?

Hvis du har brug for hjælp til Metra 70-1786 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Metra Manualer

Metra 99-8216 Manual

3 Juni 2025

Metra 72-8110 Manual

18 Marts 2025

Metra BLK-9600 Manual

11 Marts 2025

Metra 99-7386B Manual

11 Marts 2025

Metra 82-8602 Manual

13 Januar 2025

Metra 99-8274 Manual

13 Januar 2025

Metra 95-7642 Manual

1 Januar 2025

Metra 95-7022HG Manual

1 Januar 2025

Metra Axxess AXUSB-TY5 Manual

11 December 2024

Metra 71-017C Manual

26 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive IAN 93699 Manual

16 Juni 2025

Eminence DELTA PRO-12A Manual

16 Juni 2025

Aiphone GT-303HB Manual

16 Juni 2025

Thermaltake Commander FP Manual

16 Juni 2025

Smart365 SM-02-031600 Manual

16 Juni 2025

Playtive IAN 426212 Manual

16 Juni 2025

Playtive IAN 311493 Manual

16 Juni 2025

Playtive IAN 285641 Manual

16 Juni 2025

Playtive IAN 292936 Manual

16 Juni 2025

OmniMount VB42 Manual

16 Juni 2025