Metra 70-5518 Manual

Metra Ikke kategoriseret 70-5518

Læs gratis den danske manual til Metra 70-5518 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Metra 70-5518, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Match wires below to the matching function

of each wire on your receiver (refer to

instructions supplied with receiver).

The wire colors of your new receiver may, or

may not, match the wire colors of the

adaptor. Match adaptor and receiver wires

by function, disregarding color.

If your receiver does not have a Dimmer or

Illumination wire, tape off the Orange wire.

Connect the Black wire to Ground wire of

new receiver.

Individually tape off any unused wires.

Make final wiring connections following

instructions on the next page.

Receiver Wiring Adaptor

120 70-5518

Revision 07/26/12

White - (Not Used - Tape Off)

Violet/Black - Right Rear Speaker Negative

Red - 12 Volts Switched Power

Violet - Right Rear Speaker Positive

Green - Left Rear Speaker Positive

Yellow - 12 Volts Constant Power

Gray - (Not Used - Tape Off)

Gray/Black - (Not Used - Tape Off)

Green/Black - Left Rear Speaker Negative

Orange - Illumination

White/Black - (Not Used - Tape Off)

Orange/Black - (Not Used - Tape Off)

Black - Chassis Ground

STEP 1 -- CONNECT WIRES

STEP 2 -- INSTALL

Plug housings into factory harnesses in vehicle.

*120705518*

IMPORTANT

Before starting, compare items on your invoice with items

received. Thoroughly check packing materials.

If an item is missing, please call:

Crutchfield

Black/White - Amplifier Ground



Front Speakers

Subwoofer

Blue/White - Amplifier Turn-On

White (Left)

Gray (Right)

Violet

Green

at 1-888-955-6000

Receiver Wiring Adaptor Connections

120 70-5518

Page 2

STEP 2 -- CONTINUED

A. Strip wires back 1/2”.

B. Twist wires together and

insert in crimp cap.

C. Squeeze middle of cap

for tight connection.

STEP 3 -- APPLICATION

When ready to install the receiver, plug

the Wiring Adaptor from the new receiver

or receiver assembly into the factory

radio harness(es) in the vehicle dash.

D. Complete crimp connections

for all necessary wires.

E. Be sure to wrap any wires from

the Wiring Adaptor that are

not necessary (wires with no

match from the new receiver)

with electrical tape.

STEP 2 -- CRIMP CONNECTIONS

Tools & Parts

Required

Wire Stripper/Crimp Tool Crimp Caps

Unused Wire (Taped Off)

Receiver Wiring Adaptor

Generic Illustration

Produkt Specifikationer

Mærke:	Metra
Kategori:	Ikke kategoriseret
Model:	70-5518

Har du brug for hjælp?

Hvis du har brug for hjælp til Metra 70-5518 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Metra Manualer

Metra 99-8216 Manual

3 Juni 2025

Metra 72-8110 Manual

18 Marts 2025

Metra BLK-9600 Manual

11 Marts 2025

Metra 99-7386B Manual

11 Marts 2025

Metra 82-8602 Manual

13 Januar 2025

Metra 99-8274 Manual

13 Januar 2025

Metra 95-7642 Manual

1 Januar 2025

Metra 95-7022HG Manual

1 Januar 2025

Metra Axxess AXUSB-TY5 Manual

11 December 2024

Metra 71-017C Manual

26 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kora DTR-3342 Manual

16 Juni 2025

Playtive IAN 346914 Manual

16 Juni 2025

Playtive IAN 303641 Manual

16 Juni 2025

Playtive HG05107 Manual

16 Juni 2025

Playtive IAN 346906 Manual

16 Juni 2025

Playtive IAN 285778 Manual

16 Juni 2025

Planet Audio PCBLK3.5 Manual

16 Juni 2025

Sabrent NT-UA25 Manual

16 Juni 2025

ElectriQ STRV-Z1-WH Manual

16 Juni 2025

Watts ETX-30 Manual

16 Juni 2025