Metra 70-7902 Manual

Metra Ikke kategoriseret 70-7902

Læs gratis den danske manual til Metra 70-7902 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Metra 70-7902, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Receiver Wiring Adaptor

120 70-7902

Revision 02/24/16

STEP 1 -- MATCH & CONNECT WIRES

*120707902*

IMPORTANT

Before starting, compare items on your invoice with items

received. Thoroughly check packing materials. If an item

is missing, please call Crutchfield at 1-888-955-6000.

Match wires below to the matching function of each wire on your receiver (refer to instructions supplied with receiver). The wire colors of your

new receiver may, or may not, match the wire colors of the adaptor. Match adaptor and receiver wires by function, disregarding color.

Your receiver illumination wire could be Orange or Orange/White. As with other wires, match this wire to illumination wire in this harness by

function, not by color. If your receiver does not have an illumination wire, tape off the illumination wire.

Individually tape off any unused wires.

Make final wiring connections following instructions on the next page.

Orange - Illumination

Yellow - 12 Volts Constant Power

Red - 12 Volts Switched Power

White - Left Front Speaker Positive

Blue - Antenna/Amplifier Turn-On

Violet - Right Rear Speaker Positive

Green - Left Rear Speaker Positive

Gray - Right Front Speaker Positive

Gray/Black - Right Front Speaker Negative

White/Black - Left Front Speaker Negative

Black - Chassis Ground

Violet/Black - Right Rear Speaker Negative

Green/Black - Left Rear Speaker Negative

Receiver Wiring Adaptor Connections

120 70-7902

Page 2

STEP 2 -- CONTINUED

A. Strip wires back 1/2”.

B. Twist wires together and

insert in crimp cap.

C. Squeeze middle of cap

for tight connection.

STEP 3 -- APPLICATION

When ready to install the receiver, plug

the Wiring Adaptor from the new receiver

or receiver assembly into the factory

radio harness(es) in the vehicle dash.

D. Complete crimp connections

for all necessary wires.

E. Be sure to wrap any wires from

the Wiring Adaptor that are

not necessary (wires with no

match from the new receiver)

with electrical tape.

STEP 2 -- CRIMP CONNECTIONS

Tools & Parts

Required

Wire Stripper/Crimp Tool Crimp Caps

Unused Wire (tape over bare wires)

Receiver Wiring Adaptor

Generic Illustration

Produkt Specifikationer

Mærke:	Metra
Kategori:	Ikke kategoriseret
Model:	70-7902

Har du brug for hjælp?

Hvis du har brug for hjælp til Metra 70-7902 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Metra Manualer

Metra 99-8216 Manual

3 Juni 2025

Metra 72-8110 Manual

18 Marts 2025

Metra BLK-9600 Manual

11 Marts 2025

Metra 99-7386B Manual

11 Marts 2025

Metra 82-8602 Manual

13 Januar 2025

Metra 99-8274 Manual

13 Januar 2025

Metra 95-7642 Manual

1 Januar 2025

Metra 95-7022HG Manual

1 Januar 2025

Metra Axxess AXUSB-TY5 Manual

11 December 2024

Metra 71-017C Manual

26 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Festo VYKB-F10-M32-16-PF-1HPA Manual

17 Juni 2025

Premium Levella PCO1204B Manual

17 Juni 2025

Tekron NTS 03-G+ Manual

17 Juni 2025

A.H. Beard Enliven 2 Manual

17 Juni 2025

Festo EPCE-TB-45-50-FL-MF-ST-M-H1-PLK-AA Manual

17 Juni 2025

Festo DFPC-200-400-D Manual

17 Juni 2025

Playtive HG05214 Manual

17 Juni 2025

Philips AVENT SCF173 Manual

17 Juni 2025

OmniMount ShadowBox SB1R Manual

17 Juni 2025

Hansgrohe AXOR Uno 45004330 Manual

17 Juni 2025