Metra 82-3016 Manual


Læs gratis den danske manual til Metra 82-3016 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Metra 82-3016, eller vil du spørge andre brugere om produktet?

Side 1/1
1. Use two (2) screws to secure speaker adaptor bracket
to a stationary surface that can be used as a backup
for drilling (Figure 1).
2. Choose a hole saw to match the opening size for the
tweeter to be installed. Using the in the center dimple
of the bracket as the center for the hole, cut out
opening for the tweeter (Figure 2).
Note: Depending on the application, some tweeters
can be surface mounted to the adaptor bracket without
drilling.
3. Remove screws and remove bracket from backup
surface.
4. Secure tweeter to adaptor bracket using the method
described and hardware supplied with the tweeter
purchased. Additional drilling may be required.Note:
5. Make connections to vehicle speaker wires and
secure speaker/bracket assembly to location (Figure 3).
Speaker Adaptor Bracket
Tools Required
120 82-3016
Phillips
Screwdriver
Parts
Supplied:
(2) Brackets
Revision 10/08/20
*120823016*
6
It may be necessary to acquire screws to mount the speaker/
bracket assembly to the location.
IMPORTANT
!
Copyright 2020 Crutchfield Corporation
IMPORTANT
Before starting, compare items on your invoice with items
received. Thoroughly check packing materials. If an item
is missing, please call Crutchfield at 1-888-955-6000.
FIGURE 3FIGURE 1
FIGURE 2
Speaker Adaptor Br
Speaker Adaptor Br
Speaker Adaptor Br
Speaker Adaptor Bracket
acket
acket
acketSpeaker Adaptor Bracket
Dimple
Dimple
Dimple
DimpleDimple
Drill &
Hole Saw


Produkt Specifikationer

Mærke: Metra
Kategori: Ikke kategoriseret
Model: 82-3016

Har du brug for hjælp?

Hvis du har brug for hjælp til Metra 82-3016 stil et spørgsmål nedenfor, og andre brugere vil svare dig