Metra 95-3031B Manual


Læs nedenfor 📖 manual på dansk for Metra 95-3031B (4 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 23 personer og blev bedømt med 3.7 stjerner i gennemsnit af 12 brugere

Side 1/4
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 1/21/20 INST95-3031B
I N S TA L L AT I O N I N S T R U C T I O N S
95-3031B
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
KIT FEATURES
ISO DDIN radio provision
Painted scratch resistant matte black to match the factory finish
KIT COMPONENTS
• A) Radio bezel • B) Radio brackets
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 9/32” socket wrench
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS
Wiring Harness: See metraonline for harness
interface solutions
Antenna Adapter: 40-CR10
(sold separately)
Chevrolet Captiva Sport (w nav) 2014-2015
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
A B
1.800.221.0932
|
MetraOnline.com
2
1. Unclip and remove the trim panel on the
top of the dash. (Figure A)
2. Remove (2) 9/32” screws securing
the radio trim panel, then unclip and
remove. (Figure B)
3. Unclip the entire lower console panel
and set aside. (Figure C)
4. Remove (4) 9/32” screws securing the
radio. Slide the radio out, then unplug
and remove.
Continue to Kit Assembly
(Figure B)(Figure A) (Figure C)
DASH DISASSEMBLY


Produkt Specifikationer

Mærke: Metra
Kategori: Ikke kategoriseret
Model: 95-3031B

Har du brug for hjælp?

Hvis du har brug for hjælp til Metra 95-3031B stil et spørgsmål nedenfor, og andre brugere vil svare dig