Metra 95-5844S Manual

Metra Ikke kategoriseret 95-5844S

Læs gratis den danske manual til Metra 95-5844S (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Metra 95-5844S, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

I N S TA L L A T I O N I N S T R U C T I O N S

95-5844S

KIT FEATURES

• ISO DDIN radio provision

• Painted silver to match the factory appearance

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

• 8mm, 7/32” and 9/32” socket wrench

• T-20 Torx driver

TABLE OF CONTENTS

Dash Disassembly ..................................................2

Kit Preparation ....................................................... 3

Kit Assembly ..........................................................3

WIRING & ANTENNA CONNECTIONS

(sold separately)

Wiring Harness: Please visit metraonline.com for

interface options

Antenna Adapter: 40-CR10

A B

Lincoln Navigator 2007-2014

Intended for 4x2 models without factory NAV

1.800.221.0932

MetraOnline.com

1. Unclip and remove the panel surrounding

the shifter. (Figure A)

2. Remove (2) 9/32” screws from the

bottom of the radio/climate control trim

panel, and then unclip and remove.

(Figure B)

3. Remove (4) 9/32” screws securing the

radio and then remove.

Radio/climate control trim panel disassembly:

4. Remove (4) Torx T-20 screws and remove

the factory pocket/ ashtray assembly

from the factory dash panel. (Figure C)

5. Remove (4) 7/32 screws and remove the

factory climate controls. (Figure C)

6. Remove all the factory button assembly’s

from the factory dash panel. (Figure C)

7. Remove (7) Torx T-20 screws and (4)

push-nuts to remove the center panel

from the factory dash panel. (Figure C)

Continue to Kit Preparation

(Figure B)

(Figure A)

DASH DISASSEMBLY

(Figure C)

Produkt Specifikationer

Mærke:	Metra
Kategori:	Ikke kategoriseret
Model:	95-5844S

Har du brug for hjælp?

Hvis du har brug for hjælp til Metra 95-5844S stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Metra Manualer

Metra 99-8216 Manual

3 Juni 2025

Metra 72-8110 Manual

18 Marts 2025

Metra BLK-9600 Manual

11 Marts 2025

Metra 99-7386B Manual

11 Marts 2025

Metra 82-8602 Manual

13 Januar 2025

Metra 99-8274 Manual

13 Januar 2025

Metra 95-7642 Manual

1 Januar 2025

Metra 95-7022HG Manual

1 Januar 2025

Metra Axxess AXUSB-TY5 Manual

11 December 2024

Metra 71-017C Manual

26 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Festo DFPD-10-RP-90-RD Manual

17 Juni 2025

Fromm & Starck STAR_RS133E169_01 Manual

17 Juni 2025

Haier Gloria HPS-2.5-1200 Manual

17 Juni 2025

Makita DDF490 Manual

17 Juni 2025

Royal Catering RCSSCB-200X60-E-B Manual

17 Juni 2025

Crestron CLX-PWS75 Manual

17 Juni 2025

Wahoo RPM Speed Sensor Manual

17 Juni 2025

Mars Gaming MPZE750SIM Manual

17 Juni 2025

Digitus DN-91524S Manual

17 Juni 2025

Royal Catering RCWR-120.2 Manual

17 Juni 2025