Metra 95-6539 Manual

Metra Ikke kategoriseret 95-6539

Læs gratis den danske manual til Metra 95-6539 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Metra 95-6539, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

REV. 1/10/2017 INST95-6539

INSTALLATION INSTRUCTIONS FOR PART 95-6539

CAUTION!

All accessories, switches, climate controls panels,

and especially air bag indicator lights must be connected before

cycling the ignition. Also, do not remove the factory radio with

the key in the on position, or while the vehicle is running.

• ISO DDIN radio provision

• A) Radio trim panel • B) Radio brackets • C) (2) Blank out plugs • D) (6) Panel clips

• E) (2) #8 x 3/8” Phillips screws • Passenger airbag sticker (not shown) • Blank sticker (not shown)

20;-,(;<9,:

20;*64765,5;:

>0905.(5;,55(*655,*;065: (sold separately)

Wiring Harness: • 70-1817 (01’ only) 70-6502 (02-07’ models)

Antenna Adapter: • 40-CR10 (02-07’ models only) Steering wheel control interface: • ASWC-1

• Panel removal tool • Phillips screwdriver

• Torx T-10 screwdriver

;663:9,8<09,+

Chrysler Voyager, Town and Country /

Dodge Caravan, Grand Caravan 2001-2007

95-6539

Table of Contents

BCD E

Dash Disassembly ................................................. 2

Kit Preparation ....................................................2-3

Kit Assembly .......................................................... 4

95-6539

Dash Disassembly Kit Preparation

1. Open cup holder. Unclip and

remove trim above cup holder.

2. Remove (2) Phillips head screws

from above cup holder. (Figure A)

3. Unclip and remove the dash

trim panel.

4. Remove (4) Phillips head screws

securing the radio. Disconnect and

remove the radio.

Continue to Kit Preparation

From the factory radio/climate

control panel:

1. Remove (3) T-10 Torx screws

securing the vents into the factory

radio trim panel, then unclip and

remove the vents from the panel.

2. Remove (3) T-10 Torx screws

securing the hazard button

assembly into the factory radio trim

panel, remove the switch assembly.

If the vehicle has the Note:

passenger airbag light in the factory

radio panel, it will be loose at this

time, so remove it. If the passenger

airbag light is not present or it is

in the hazard switch assembly,

continue to the next step.

3. Remove (6) T-10 Torx screws

securing the climate controls into

the factory radio trim panel, and

then remove.

Continued on the next page

(Figure A)

Please visit Metraonline.com for

Kit Preparation illustrations.

Produkt Specifikationer

Mærke:	Metra
Kategori:	Ikke kategoriseret
Model:	95-6539

Har du brug for hjælp?

Hvis du har brug for hjælp til Metra 95-6539 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Metra Manualer

Metra 99-8216 Manual

3 Juni 2025

Metra 72-8110 Manual

18 Marts 2025

Metra BLK-9600 Manual

11 Marts 2025

Metra 99-7386B Manual

11 Marts 2025

Metra 82-8602 Manual

13 Januar 2025

Metra 99-8274 Manual

13 Januar 2025

Metra 95-7642 Manual

1 Januar 2025

Metra 95-7022HG Manual

1 Januar 2025

Metra Axxess AXUSB-TY5 Manual

11 December 2024

Metra 71-017C Manual

26 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Festo DFM-32-100-B-PPV-A-KF Manual

17 Juni 2025

Playtive IAN 285777 Manual

17 Juni 2025

Festo VAEM-L1-S-M3-26 Manual

17 Juni 2025

Festo DFPC-320 Manual

17 Juni 2025

EFX ICAK12 Manual

17 Juni 2025

Bearware 307294 Manual

17 Juni 2025

Futaba MC-9200H/A Manual

17 Juni 2025

Hansgrohe AXOR Montreux 16517800 Manual

17 Juni 2025

OmniMount 2N1-S Manual

17 Juni 2025

Festo DSNU-S-12- -F1A Manual

17 Juni 2025